Temperature limit registers are signed. Limits therefore need to be clamped to (-128, 127) degrees C and not to (0, 255) degrees C. Without this fix, writing a limit of 128 degrees C sets the actual limit to -128 degrees C. Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- drivers/hwmon/adt7470.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 0f4dea5..8fe1495 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -515,7 +515,7 @@ static ssize_t set_temp_min(struct device *dev, return -EINVAL; temp = DIV_ROUND_CLOSEST(temp, 1000); - temp = clamp_val(temp, 0, 255); + temp = clamp_val(temp, -128, 127); mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -549,7 +549,7 @@ static ssize_t set_temp_max(struct device *dev, return -EINVAL; temp = DIV_ROUND_CLOSEST(temp, 1000); - temp = clamp_val(temp, 0, 255); + temp = clamp_val(temp, -128, 127); mutex_lock(&data->lock); data->temp_max[attr->index] = temp; -- 1.9.1 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
