On Wed, Jul 09, 2014 at 04:53:20PM +0200, Kamil Debski wrote:
> The pwm-fan driver enables control of fans connected to PWM lines.
> This driver uses the PWM framework, so it is compatible with all
> PWM devices that provide drivers through the PWM framework.
>
> Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/hwmon/pwm-fan.txt | 12 ++
> drivers/hwmon/Kconfig | 9 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/pwm-fan.c | 199 ++++++++++++++++++++
> 4 files changed, 221 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> create mode 100644 drivers/hwmon/pwm-fan.c
Documentation/hwmon/pwm-fan is missing.
>
> diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> new file mode 100644
> index 0000000..f534607
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
> @@ -0,0 +1,12 @@
> +Bindings for a fan connected to the PWM lines
> +
> +Required properties:
> +- compatible: "pwm-fan"
> +- pwms: the PWM that is used to control the PWM fan
> +
> +Example:
> + pwm-fan {
> + compatible = "pwm-fan";
> + status = "okay";
> + pwms = <&pwm 0 10000 0>;
> + };
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 08531a1..838ffb8 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1104,6 +1104,15 @@ config SENSORS_PCF8591
>
> source drivers/hwmon/pmbus/Kconfig
>
> +config SENSORS_PWM_FAN
> + tristate "PWM fan"
> + depends on PWM
> + help
> + If you say yes here you get support for fans connected to PWM lines.
> +
> + This driver can also be built as a module. If so, the module
> + will be called pwm-fan.
> +
> config SENSORS_SHT15
> tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
> depends on GPIOLIB
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 3dc0f02..3967ecf 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -120,6 +120,7 @@ obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
> obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
> obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
> obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
> +obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
> obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
> obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
> obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o
> diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
> new file mode 100644
> index 0000000..78fa627
> --- /dev/null
> +++ b/drivers/hwmon/pwm-fan.c
> @@ -0,0 +1,199 @@
> +/*
> + * pwm-fan.c - Hwmon driver for fans connected to PWM lines.
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *
> + * Author: Kamil Debski <k.debski@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Please run the patch through checkpatch and ensure that all warnings and errors
are fixed.
> + */
> +
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/hwmon.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
For new drivers, please list include files in alphabetic order.
> +
> +#define MAX_PWM 255
> +
> +struct pwm_fan_ctx {
> + struct device *hwmon;
> + struct mutex lock;
> + struct platform_device *pdev;
> + struct pwm_device *pwm;
> + unsigned int duty_cycle;
> + unsigned char pwm_value;
> +};
> +
> +static ssize_t show_pwm_enable(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + /* For the sake of simplicity only mode 1 (PWM) is supported */
> + return sprintf(buf, "1\n");
> +}
> +
> +static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
> + unsigned long pwm, duty;
> +
> + if (kstrtoul(buf, 10, &pwm) || pwm > MAX_PWM)
> + return -EINVAL;
> +
> + mutex_lock(&ctx->lock);
> +
> + if (ctx->pwm_value == pwm)
> + goto exit_set_pwm;
> +
> + duty = DIV_ROUND_UP(pwm * (ctx->pwm->period - 1), MAX_PWM);
Unnecessary double space.
> + if (pwm_config(ctx->pwm, duty, ctx->pwm->period))
> + goto exit_set_pwm;
Please return the error code.
> +
> + ctx->duty_cycle = duty;
> + ctx->pwm_value = pwm;
> +
> +
Single empty line only please.
> +exit_set_pwm:
> + mutex_unlock(&ctx->lock);
> +
> + return count;
> +}
> +
> +static ssize_t show_pwm(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
> +
> + return sprintf(buf, "%d\n", ctx->pwm_value);
pwm_value is unsigned, so please use %u.
> +}
> +
> +
Single empty line only please
> +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
> + show_pwm_enable, NULL, 0);
Is this attribute really needed ?
> +static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR,
> + show_pwm, set_pwm, 0);
> +
> +static struct attribute *pwm_fan_attributes[] = {
> + &sensor_dev_attr_pwm1_enable.dev_attr.attr,
> + &sensor_dev_attr_pwm1.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group pwm_fan_group = {
> + .attrs = pwm_fan_attributes,
> +};
> +
> +static const struct attribute_group *pwm_fan_groups[] = {
> + &pwm_fan_group,
> + NULL
> +};
Please use the ATTRIBUTE_GROUPS macro.
> +
> +static int pwm_fan_probe(struct platform_device *pdev)
> +{
> + struct pwm_fan_ctx *ctx;
> +
> + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx) {
> + dev_err(&pdev->dev, "Not enough memory for PWM fan device\n");
Unnecessary error message.
> + return -ENOMEM;
> + }
> +
> + ctx->pdev = pdev;
> + mutex_init(&ctx->lock);
> +
> + ctx->pwm = devm_of_pwm_get(&pdev->dev, pdev->dev.of_node, 0);
Last argument is a string pointer. Please use NULL.
> + if (IS_ERR(ctx->pwm)) {
> + dev_err(&pdev->dev, "Could not get PWM");
> + return -EINVAL;
Return PTR_ERR(ctx->pwm).
> + }
> +
> + dev_set_drvdata(&pdev->dev, ctx);
> + platform_set_drvdata(pdev, ctx);
> +
> + /* Set duty cycle to maximum allowed */
> + ctx->duty_cycle = ctx->pwm->period - 1;
> + ctx->pwm_value = MAX_PWM;
> + pwm_config(ctx->pwm, ctx->duty_cycle, ctx->pwm->period);
pwm_config() can return an error. Why not check it here ?
> +
> + ctx->hwmon = hwmon_device_register_with_groups(&pdev->dev, "pwmfan",
> + ctx, pwm_fan_groups);
Why not devm_hwmon_device_register_with_groups ?
> +
> + if (IS_ERR(ctx->hwmon)) {
> + dev_err(&pdev->dev, "Failed to register hwmon device");
> + return PTR_ERR(ctx->hwmon);
> + }
> +
> + /* Enbale PWM output */
> + pwm_enable(ctx->pwm);
> +
> + return 0;
> +}
> +
> +static int pwm_fan_remove(struct platform_device *pdev)
> +{
> + struct pwm_fan_ctx *ctx = platform_get_drvdata(pdev);
> +
> + pwm_disable(ctx->pwm);
Is this needed ? I don't see it used by the leds-pwm driver on cleanup.
> + hwmon_device_unregister(ctx->hwmon);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int pwm_fan_suspend(struct device *dev)
> +{
> + struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
> +
> + return pwm_config(ctx->pwm, 0, ctx->pwm->period);
Wonder if this should be pwm_disable instead (and pwm_enable on resume).
Any thoughts ?
> +}
> +
> +static int pwm_fan_resume(struct device *dev)
> +{
> + struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
> +
> + return pwm_config(ctx->pwm, ctx->duty_cycle, ctx->pwm->period);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(pwm_fan_pm, pwm_fan_suspend, pwm_fan_resume);
> +#endif
> +
> +
> +
Single empty line only please
> +static struct of_device_id of_pwm_fan_match[] = {
> + { .compatible = "pwm-fan", },
> + {},
> +};
> +
> +static struct platform_driver pwm_fan_driver = {
> + .probe = pwm_fan_probe,
> + .remove = pwm_fan_remove,
> + .driver = {
> + .name = "pwm-fan",
> +#ifdef CONFIG_PM_SLEEP
> + .pm = &pwm_fan_pm,
> +#endif
> + .of_match_table = of_match_ptr(of_pwm_fan_match),
> + },
> +};
> +
> +module_platform_driver(pwm_fan_driver);
> +
> +MODULE_AUTHOR("Kamil Debski <k.debski@xxxxxxxxxxx>");
> +MODULE_ALIAS("platform:pwm-fan");
> +MODULE_DESCRIPTION("PWM FAN driver");
> +MODULE_LICENSE("GPL");
> --
> 1.7.9.5
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@xxxxxxxxxxxxxx
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
