Upper limit for write operations to temperature limit registers was clamped to a fractional value. However, limit registers do not support fractional values. As a result, upper limits of 127.5 degrees C or higher resulted in a rounded limit of 128 degrees C. Since limit registers are signed, this was stored as -128 degrees C. Clamp limits to (-55, +127) degrees C to solve the problem. Value on writes to auto_temp[12]_min and auto_temp[12]_max were not clamped at all, but masked. As a result, out-of-range writes resulted in a more or less arbitrary limit. Clamp those attributes to (0, 127) degrees C for more predictable results. Cc: Axel Lin <axel.lin@xxxxxxxxxx> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- drivers/hwmon/adm1031.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index a8a540c..9eaa235 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -366,6 +366,7 @@ set_auto_temp_min(struct device *dev, struct device_attribute *attr, return ret; mutex_lock(&data->update_lock); + val = clamp_val(val, 0, 127000); data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]); adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), data->auto_temp[nr]); @@ -395,6 +396,7 @@ set_auto_temp_max(struct device *dev, struct device_attribute *attr, return ret; mutex_lock(&data->update_lock); + val = clamp_val(val, 0, 127000); data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]); adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), @@ -696,7 +698,7 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr), @@ -717,7 +719,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr), @@ -738,7 +740,7 @@ static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_crit[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr), -- 1.9.1 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
