Reorder functions to avoid forward declaration.
Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
---
drivers/hwmon/gl520sm.c | 317 +++++++++++++++++++++++-------------------------
1 file changed, 150 insertions(+), 167 deletions(-)
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index ed56e09..86c08a1 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -73,38 +73,6 @@ static const u8 GL520_REG_TEMP_MAX_HYST[] = { 0x06, 0x18 };
#define GL520_REG_BEEP_MASK 0x10
#define GL520_REG_BEEP_ENABLE GL520_REG_CONF
-/*
- * Function declarations
- */
-
-static int gl520_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int gl520_detect(struct i2c_client *client, struct i2c_board_info *info);
-static void gl520_init_client(struct i2c_client *client);
-static int gl520_remove(struct i2c_client *client);
-static int gl520_read_value(struct i2c_client *client, u8 reg);
-static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value);
-static struct gl520_data *gl520_update_device(struct device *dev);
-
-/* Driver data */
-static const struct i2c_device_id gl520_id[] = {
- { "gl520sm", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, gl520_id);
-
-static struct i2c_driver gl520_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "gl520sm",
- },
- .probe = gl520_probe,
- .remove = gl520_remove,
- .id_table = gl520_id,
- .detect = gl520_detect,
- .address_list = normal_i2c,
-};
-
/* Client data */
struct gl520_data {
struct device *hwmon_dev;
@@ -132,6 +100,102 @@ struct gl520_data {
};
/*
+ * Registers 0x07 to 0x0c are word-sized, others are byte-sized
+ * GL520 uses a high-byte first convention
+ */
+static int gl520_read_value(struct i2c_client *client, u8 reg)
+{
+ if ((reg >= 0x07) && (reg <= 0x0c))
+ return i2c_smbus_read_word_swapped(client, reg);
+ else
+ return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+ if ((reg >= 0x07) && (reg <= 0x0c))
+ return i2c_smbus_write_word_swapped(client, reg, value);
+ else
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static struct gl520_data *gl520_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct gl520_data *data = i2c_get_clientdata(client);
+ int val, i;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
+
+ dev_dbg(&client->dev, "Starting gl520sm update\n");
+
+ data->alarms = gl520_read_value(client, GL520_REG_ALARMS);
+ data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
+ data->vid = gl520_read_value(client,
+ GL520_REG_VID_INPUT) & 0x1f;
+
+ for (i = 0; i < 4; i++) {
+ data->in_input[i] = gl520_read_value(client,
+ GL520_REG_IN_INPUT[i]);
+ val = gl520_read_value(client, GL520_REG_IN_LIMIT[i]);
+ data->in_min[i] = val & 0xff;
+ data->in_max[i] = (val >> 8) & 0xff;
+ }
+
+ val = gl520_read_value(client, GL520_REG_FAN_INPUT);
+ data->fan_input[0] = (val >> 8) & 0xff;
+ data->fan_input[1] = val & 0xff;
+
+ val = gl520_read_value(client, GL520_REG_FAN_MIN);
+ data->fan_min[0] = (val >> 8) & 0xff;
+ data->fan_min[1] = val & 0xff;
+
+ data->temp_input[0] = gl520_read_value(client,
+ GL520_REG_TEMP_INPUT[0]);
+ data->temp_max[0] = gl520_read_value(client,
+ GL520_REG_TEMP_MAX[0]);
+ data->temp_max_hyst[0] = gl520_read_value(client,
+ GL520_REG_TEMP_MAX_HYST[0]);
+
+ val = gl520_read_value(client, GL520_REG_FAN_DIV);
+ data->fan_div[0] = (val >> 6) & 0x03;
+ data->fan_div[1] = (val >> 4) & 0x03;
+ data->fan_off = (val >> 2) & 0x01;
+
+ data->alarms &= data->alarm_mask;
+
+ val = gl520_read_value(client, GL520_REG_CONF);
+ data->beep_enable = !((val >> 2) & 1);
+
+ /* Temp1 and Vin4 are the same input */
+ if (data->two_temps) {
+ data->temp_input[1] = gl520_read_value(client,
+ GL520_REG_TEMP_INPUT[1]);
+ data->temp_max[1] = gl520_read_value(client,
+ GL520_REG_TEMP_MAX[1]);
+ data->temp_max_hyst[1] = gl520_read_value(client,
+ GL520_REG_TEMP_MAX_HYST[1]);
+ } else {
+ data->in_input[4] = gl520_read_value(client,
+ GL520_REG_IN_INPUT[4]);
+ data->in_min[4] = gl520_read_value(client,
+ GL520_REG_IN_MIN[4]);
+ data->in_max[4] = gl520_read_value(client,
+ GL520_REG_IN_MAX[4]);
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+/*
* Sysfs stuff
*/
@@ -772,6 +836,44 @@ static int gl520_detect(struct i2c_client *client, struct i2c_board_info *info)
return 0;
}
+/* Called when we have found a new GL520SM. */
+static void gl520_init_client(struct i2c_client *client)
+{
+ struct gl520_data *data = i2c_get_clientdata(client);
+ u8 oldconf, conf;
+
+ conf = oldconf = gl520_read_value(client, GL520_REG_CONF);
+
+ data->alarm_mask = 0xff;
+ data->vrm = vid_which_vrm();
+
+ if (extra_sensor_type == 1)
+ conf &= ~0x10;
+ else if (extra_sensor_type == 2)
+ conf |= 0x10;
+ data->two_temps = !(conf & 0x10);
+
+ /* If IRQ# is disabled, we can safely force comparator mode */
+ if (!(conf & 0x20))
+ conf &= 0xf7;
+
+ /* Enable monitoring if needed */
+ conf |= 0x40;
+
+ if (conf != oldconf)
+ gl520_write_value(client, GL520_REG_CONF, conf);
+
+ gl520_update_device(&(client->dev));
+
+ if (data->fan_min[0] == 0)
+ data->alarm_mask &= ~0x20;
+ if (data->fan_min[1] == 0)
+ data->alarm_mask &= ~0x40;
+
+ data->beep_mask &= data->alarm_mask;
+ gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
+}
+
static int gl520_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -817,45 +919,6 @@ exit_remove_files:
return err;
}
-
-/* Called when we have found a new GL520SM. */
-static void gl520_init_client(struct i2c_client *client)
-{
- struct gl520_data *data = i2c_get_clientdata(client);
- u8 oldconf, conf;
-
- conf = oldconf = gl520_read_value(client, GL520_REG_CONF);
-
- data->alarm_mask = 0xff;
- data->vrm = vid_which_vrm();
-
- if (extra_sensor_type == 1)
- conf &= ~0x10;
- else if (extra_sensor_type == 2)
- conf |= 0x10;
- data->two_temps = !(conf & 0x10);
-
- /* If IRQ# is disabled, we can safely force comparator mode */
- if (!(conf & 0x20))
- conf &= 0xf7;
-
- /* Enable monitoring if needed */
- conf |= 0x40;
-
- if (conf != oldconf)
- gl520_write_value(client, GL520_REG_CONF, conf);
-
- gl520_update_device(&(client->dev));
-
- if (data->fan_min[0] == 0)
- data->alarm_mask &= ~0x20;
- if (data->fan_min[1] == 0)
- data->alarm_mask &= ~0x40;
-
- data->beep_mask &= data->alarm_mask;
- gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
-}
-
static int gl520_remove(struct i2c_client *client)
{
struct gl520_data *data = i2c_get_clientdata(client);
@@ -868,103 +931,23 @@ static int gl520_remove(struct i2c_client *client)
return 0;
}
+static const struct i2c_device_id gl520_id[] = {
+ { "gl520sm", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, gl520_id);
-/*
- * Registers 0x07 to 0x0c are word-sized, others are byte-sized
- * GL520 uses a high-byte first convention
- */
-static int gl520_read_value(struct i2c_client *client, u8 reg)
-{
- if ((reg >= 0x07) && (reg <= 0x0c))
- return i2c_smbus_read_word_swapped(client, reg);
- else
- return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value)
-{
- if ((reg >= 0x07) && (reg <= 0x0c))
- return i2c_smbus_write_word_swapped(client, reg, value);
- else
- return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-
-static struct gl520_data *gl520_update_device(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct gl520_data *data = i2c_get_clientdata(client);
- int val, i;
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
-
- dev_dbg(&client->dev, "Starting gl520sm update\n");
-
- data->alarms = gl520_read_value(client, GL520_REG_ALARMS);
- data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
- data->vid = gl520_read_value(client,
- GL520_REG_VID_INPUT) & 0x1f;
-
- for (i = 0; i < 4; i++) {
- data->in_input[i] = gl520_read_value(client,
- GL520_REG_IN_INPUT[i]);
- val = gl520_read_value(client, GL520_REG_IN_LIMIT[i]);
- data->in_min[i] = val & 0xff;
- data->in_max[i] = (val >> 8) & 0xff;
- }
-
- val = gl520_read_value(client, GL520_REG_FAN_INPUT);
- data->fan_input[0] = (val >> 8) & 0xff;
- data->fan_input[1] = val & 0xff;
-
- val = gl520_read_value(client, GL520_REG_FAN_MIN);
- data->fan_min[0] = (val >> 8) & 0xff;
- data->fan_min[1] = val & 0xff;
-
- data->temp_input[0] = gl520_read_value(client,
- GL520_REG_TEMP_INPUT[0]);
- data->temp_max[0] = gl520_read_value(client,
- GL520_REG_TEMP_MAX[0]);
- data->temp_max_hyst[0] = gl520_read_value(client,
- GL520_REG_TEMP_MAX_HYST[0]);
-
- val = gl520_read_value(client, GL520_REG_FAN_DIV);
- data->fan_div[0] = (val >> 6) & 0x03;
- data->fan_div[1] = (val >> 4) & 0x03;
- data->fan_off = (val >> 2) & 0x01;
-
- data->alarms &= data->alarm_mask;
-
- val = gl520_read_value(client, GL520_REG_CONF);
- data->beep_enable = !((val >> 2) & 1);
-
- /* Temp1 and Vin4 are the same input */
- if (data->two_temps) {
- data->temp_input[1] = gl520_read_value(client,
- GL520_REG_TEMP_INPUT[1]);
- data->temp_max[1] = gl520_read_value(client,
- GL520_REG_TEMP_MAX[1]);
- data->temp_max_hyst[1] = gl520_read_value(client,
- GL520_REG_TEMP_MAX_HYST[1]);
- } else {
- data->in_input[4] = gl520_read_value(client,
- GL520_REG_IN_INPUT[4]);
- data->in_min[4] = gl520_read_value(client,
- GL520_REG_IN_MIN[4]);
- data->in_max[4] = gl520_read_value(client,
- GL520_REG_IN_MAX[4]);
- }
-
- data->last_updated = jiffies;
- data->valid = 1;
- }
-
- mutex_unlock(&data->update_lock);
-
- return data;
-}
+static struct i2c_driver gl520_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "gl520sm",
+ },
+ .probe = gl520_probe,
+ .remove = gl520_remove,
+ .id_table = gl520_id,
+ .detect = gl520_detect,
+ .address_list = normal_i2c,
+};
module_i2c_driver(gl520_driver);
--
1.9.1
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
