Use ATTRIBUTE_GROUPS macro and devm_hwmon_device_register_with_groups() to
simplify the code a bit.
The update_lock mutex is not used, so remove it.
Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
---
drivers/hwmon/ads7871.c | 65 ++++++++++++-------------------------------------
1 file changed, 15 insertions(+), 50 deletions(-)
diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c
index 3eff73b..d025d13 100644
--- a/drivers/hwmon/ads7871.c
+++ b/drivers/hwmon/ads7871.c
@@ -66,14 +66,12 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
-#include <linux/mutex.h>
#include <linux/delay.h>
#define DEVICE_NAME "ads7871"
struct ads7871_data {
- struct device *hwmon_dev;
- struct mutex update_lock;
+ struct spi_device *spi;
};
static int ads7871_read_reg8(struct spi_device *spi, int reg)
@@ -101,7 +99,8 @@ static int ads7871_write_reg8(struct spi_device *spi, int reg, u8 val)
static ssize_t show_voltage(struct device *dev,
struct device_attribute *da, char *buf)
{
- struct spi_device *spi = to_spi_device(dev);
+ struct ads7871_data *pdata = dev_get_drvdata(dev);
+ struct spi_device *spi = pdata->spi;
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int ret, val, i = 0;
uint8_t channel, mux_cnv;
@@ -139,12 +138,6 @@ static ssize_t show_voltage(struct device *dev,
}
}
-static ssize_t ads7871_show_name(struct device *dev,
- struct device_attribute *devattr, char *buf)
-{
- return sprintf(buf, "%s\n", to_spi_device(dev)->modalias);
-}
-
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_voltage, NULL, 0);
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 1);
static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 2);
@@ -154,9 +147,7 @@ static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 5);
static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 6);
static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 7);
-static DEVICE_ATTR(name, S_IRUGO, ads7871_show_name, NULL);
-
-static struct attribute *ads7871_attributes[] = {
+static struct attribute *ads7871_attrs[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
@@ -165,21 +156,18 @@ static struct attribute *ads7871_attributes[] = {
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in6_input.dev_attr.attr,
&sensor_dev_attr_in7_input.dev_attr.attr,
- &dev_attr_name.attr,
NULL
};
-static const struct attribute_group ads7871_group = {
- .attrs = ads7871_attributes,
-};
+ATTRIBUTE_GROUPS(ads7871);
static int ads7871_probe(struct spi_device *spi)
{
- int ret, err;
+ struct device *dev = &spi->dev;
+ int ret;
uint8_t val;
struct ads7871_data *pdata;
-
- dev_dbg(&spi->dev, "probe\n");
+ struct device *hwmon_dev;
/* Configure the SPI bus */
spi->mode = (SPI_MODE_0);
@@ -193,7 +181,7 @@ static int ads7871_probe(struct spi_device *spi)
ads7871_write_reg8(spi, REG_OSC_CONTROL, val);
ret = ads7871_read_reg8(spi, REG_OSC_CONTROL);
- dev_dbg(&spi->dev, "REG_OSC_CONTROL write:%x, read:%x\n", val, ret);
+ dev_dbg(dev, "REG_OSC_CONTROL write:%x, read:%x\n", val, ret);
/*
* because there is no other error checking on an SPI bus
* we need to make sure we really have a chip
@@ -201,37 +189,16 @@ static int ads7871_probe(struct spi_device *spi)
if (val != ret)
return -ENODEV;
- pdata = devm_kzalloc(&spi->dev, sizeof(struct ads7871_data),
- GFP_KERNEL);
+ pdata = devm_kzalloc(dev, sizeof(struct ads7871_data), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
- err = sysfs_create_group(&spi->dev.kobj, &ads7871_group);
- if (err < 0)
- return err;
-
- spi_set_drvdata(spi, pdata);
+ pdata->spi = spi;
- pdata->hwmon_dev = hwmon_device_register(&spi->dev);
- if (IS_ERR(pdata->hwmon_dev)) {
- err = PTR_ERR(pdata->hwmon_dev);
- goto error_remove;
- }
-
- return 0;
-
-error_remove:
- sysfs_remove_group(&spi->dev.kobj, &ads7871_group);
- return err;
-}
-
-static int ads7871_remove(struct spi_device *spi)
-{
- struct ads7871_data *pdata = spi_get_drvdata(spi);
-
- hwmon_device_unregister(pdata->hwmon_dev);
- sysfs_remove_group(&spi->dev.kobj, &ads7871_group);
- return 0;
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, spi->modalias,
+ pdata,
+ ads7871_groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
}
static struct spi_driver ads7871_driver = {
@@ -239,9 +206,7 @@ static struct spi_driver ads7871_driver = {
.name = DEVICE_NAME,
.owner = THIS_MODULE,
},
-
.probe = ads7871_probe,
- .remove = ads7871_remove,
};
module_spi_driver(ads7871_driver);
--
1.9.1
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
