Hello,
First I want to say thanks to those who developed lm-sensors, it has been a
very nice product and I have been impressed with the instillation and
detection tools. I am able to install lm-sensors, and read the temperature
sensors, but not the fan information.
There are 3 fans in my system and upon opening the bios settings on startup
I am able to see the RPM of each fan, however lm-sensors does not seem
capable of reading the fan speed.
1) Should I be able to read the fan speed if I have a Nuvoton NCT6776F chip?
2) Is there another option besides lm-sensors if you believe this is not a
viable option to read fan speeds.
Motherboard Info: Supermicr X9SPV-M4-3QE
lm-sensor version: sensors version 3.3.1 with libsensors version 3.3.1
kernel version: Linux hssl-test 3.5.0-36-generic #57~precise1-Ubuntu SMP
Thu Jun 20 18:21:09 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
I have the dmesg output, however it made my email too long and was
rejected. If you would like to see it, or a portion please let me know.
Regards,
Shannon
Module Size Used by
nls_iso8859_1 12714 2
rfcomm 47562 0
bnep 18240 2
parport_pc 32867 0
bluetooth 211812 10 rfcomm,bnep
ppdev 17114 0
binfmt_misc 17541 1
snd_hda_codec_hdmi 32476 1
snd_hda_codec_realtek 79855 1
arc4 12530 2
rt2800usb 22903 0
rt2800lib 59396 1 rt2800usb
crc_ccitt 12708 1 rt2800lib
rt2x00usb 20809 1 rt2800usb
rt2x00lib 55575 3 rt2800usb,rt2800lib,rt2x00usb
mac80211 555272 3 rt2800lib,rt2x00usb,rt2x00lib
cfg80211 208382 2 rt2x00lib,mac80211
kvm_intel 137888 0
kvm 422160 1 kvm_intel
ghash_clmulni_intel 13221 0
aesni_intel 51134 0
snd_hda_intel 34063 3
snd_hda_codec 135141 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
cryptd 20531 2 ghash_clmulni_intel,aesni_intel
aes_x86_64 17256 1 aesni_intel
hid_generic 12541 0
usbhid 47259 0
snd_hwdep 17765 1 snd_hda_codec
snd_pcm 97523 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
hid 100815 2 hid_generic,usbhid
snd_seq_midi 13325 0
snd_rawmidi 30750 1 snd_seq_midi
snd_seq_midi_event 14900 1 snd_seq_midi
i915 535221 3
drm_kms_helper 49259 1 i915
drm 290595 4 i915,drm_kms_helper
snd_seq 61931 2 snd_seq_midi,snd_seq_midi_event
psmouse 102506 0
snd_timer 29990 2 snd_pcm,snd_seq
snd_seq_device 14498 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 83674 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 15092 1 snd
microcode 23030 0
snd_page_alloc 18573 2 snd_hda_intel,snd_pcm
serio_raw 13216 0
i2c_algo_bit 13565 1 i915
lpc_ich 17145 0
mei 41410 0
video 19653 1 i915
mac_hid 13254 0
hwmon_vid 12828 0
coretemp 13642 0
lp 17800 0
parport 46563 3 parport_pc,ppdev,lp
usb_storage 49288 2
e1000e 198734 0
ahci 25869 1
libahci 27338 1 ahci
# sensors-detect revision 5984 (2011-07-10 21:22:53 +0200)
# System: Supermicro X9SPV-M4
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
Found `Nuvoton NCT6776F Super IO Sensors' Success!
(address 0xa30, driver `w83627ehf')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): Found unknown SMBus adapter 8086:1e22 at 0000:00:1f.3.
Sorry, no supported PCI bus adapters found.
Module i2c-dev loaded successfully.
Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (YES/no/selectively):
Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (YES/no/selectively):
Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (YES/no/selectively):
Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (YES/no/selectively):
Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (YES/no/selectively): Client found at address 0x4a
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Client found at address 0x4b
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `Analog Devices ADT7481'... No
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (YES/no/selectively):
Next adapter: DPDDC-B (i2c-6)
Do you want to scan it? (YES/no/selectively):
Next adapter: DPDDC-C (i2c-7)
Do you want to scan it? (YES/no/selectively):
Next adapter: DPDDC-D (i2c-8)
Do you want to scan it? (YES/no/selectively):
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `w83627ehf':
* ISA bus, address 0xa30
Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9)
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
w83627ehf
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)
Unloading i2c-dev... OK
Unloading cpuid... OK
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +106.0°C)
temp2: +29.8°C (crit = +106.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +35.0°C (high = +87.0°C, crit = +105.0°C)
Core 0: +32.0°C (high = +87.0°C, crit = +105.0°C)
Core 1: +28.0°C (high = +87.0°C, crit = +105.0°C)
Core 2: +28.0°C (high = +87.0°C, crit = +105.0°C)
Core 3: +35.0°C (high = +87.0°C, crit = +105.0°C)
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
