On Thursday 03 of April 2014, Guenter Roeck wrote: > On 04/03/2014 07:31 AM, Lubos Lunak wrote: > > On Thursday 03 of April 2014, Jean Delvare wrote: > >> Hi Lubos, > >> > >> On Wed, 2 Apr 2014 12:53:49 +0200, Lubos Lunak wrote: > >>> if system running fancontrol is suspended and resumed, fancontrol > >>> will abort, as writing the pwm value will fail because of pwm control > >>> being set to automatic control after the resume (google for 'fancontrol > >>> suspend' for various discussions about this). The attached patch fixes > >>> the problem. > >> > >> I'm afraid this is fixing the problem in the wrong place. The BIOS is > >> responsible for restoring the hardware settings at resume time. Failing > >> that, the kernel should do it. > >> > >> So you should first look for a BIOS update, even though the chances > >> that it fixes this specific problem are rather low. Then you should > >> tell us which hwmon driver you are using, so that we can add proper > >> suspend/resume code to it. > > > > hwmon_vid > > Whatever it is, it is not hwmon_vid, sorry. hwmon_vid is just a small > module which translates VID data into voltages. it87 then? -- Lubos Lunak _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
