From: Opensource [Steve Twiss] <stwiss.opensource@xxxxxxxxxxx>
Dependencies required for DA9063 HWMON support.
Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@xxxxxxxxxxx>
---
Checks performed with linux-next/next-20140321/scripts/checkpatch.pl
core.h total: 0 errors, 0 warnings, 100 lines checked
pdata.h total: 0 errors, 0 warnings, 129 lines checked
da9063-core.c total: 0 errors, 0 warnings, 199 lines checked
This patch includes the following changes:
There are small changes to da9063-core.c to allow reading the temperature
trimming offset value from the PMIC register list. This value is passed
to HWMON and is used during its calculations of the PMIC's internal junction
temperature.
There are also changes to the platform data definitions so that values may
be set for the current sources ADCIN[123]_CUR. These are provided so that
they may be configured outside the driver.
This patch applies against linux-next and next-20140321
Regards,
Steve Twiss, Dialog Semiconductor Ltd.
drivers/mfd/da9063-core.c | 13 ++++++++++++-
include/linux/mfd/da9063/core.h | 3 +++
include/linux/mfd/da9063/pdata.h | 18 ++++++++++++++++++
3 files changed, 33 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
index e70ae31..24c1838 100644
--- a/drivers/mfd/da9063-core.c
+++ b/drivers/mfd/da9063-core.c
@@ -111,6 +111,7 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
{
struct da9063_pdata *pdata = da9063->dev->platform_data;
int model, variant_id, variant_code;
+ int t_offset = 0;
int ret;
if (pdata) {
@@ -171,8 +172,18 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
ret = mfd_add_devices(da9063->dev, -1, da9063_devs,
ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base,
NULL);
- if (ret)
+ if (ret) {
dev_err(da9063->dev, "Cannot add MFD cells\n");
+ return ret;
+ }
+
+ ret = regmap_read(da9063->regmap, DA9063_REG_T_OFFSET, &t_offset);
+ if (ret < 0)
+ dev_warn(da9063->dev,
+ "Temperature trimming value cannot be read (defaulting to 0)\n");
+
+ /* pass this on to the hwmon driver */
+ da9063->t_offset = t_offset;
return ret;
}
diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h
index 00a9aac..7327d37 100644
--- a/include/linux/mfd/da9063/core.h
+++ b/include/linux/mfd/da9063/core.h
@@ -86,6 +86,9 @@ struct da9063 {
int chip_irq;
unsigned int irq_base;
struct regmap_irq_chip_data *regmap_irq;
+
+ /* Trimming */
+ int t_offset;
};
int da9063_device_init(struct da9063 *da9063, unsigned int irq);
diff --git a/include/linux/mfd/da9063/pdata.h b/include/linux/mfd/da9063/pdata.h
index 95c8742..576033e 100644
--- a/include/linux/mfd/da9063/pdata.h
+++ b/include/linux/mfd/da9063/pdata.h
@@ -62,6 +62,23 @@ struct da9063_regulators_pdata {
struct da9063_regulator_data *regulator_data;
};
+/* HWMON platform data */
+#define DA9063_SET_ADCIN1_CUR_1UA 0x00
+#define DA9063_SET_ADCIN1_CUR_2UA 0x01
+#define DA9063_SET_ADCIN1_CUR_10UA 0x02
+#define DA9063_SET_ADCIN1_CUR_40UA 0x03
+#define DA9063_SET_ADCIN2_CUR_1UA 0x00
+#define DA9063_SET_ADCIN2_CUR_2UA 0x01
+#define DA9063_SET_ADCIN2_CUR_10UA 0x02
+#define DA9063_SET_ADCIN2_CUR_40UA 0x03
+#define DA9063_SET_ADCIN3_CUR_10UA 0x00
+
+struct da9063_hwmon_pdata {
+ unsigned char adcin1_cur;
+ unsigned char adcin2_cur;
+ unsigned char adcin3_cur;
+};
+
/*
* RGB LED configuration
@@ -106,6 +123,7 @@ struct da9063_pdata {
unsigned flags;
struct da9063_regulators_pdata *regulators_pdata;
struct led_platform_data *leds_pdata;
+ struct da9063_hwmon_pdata *hwmon_pdata;
};
#endif /* __MFD_DA9063_PDATA_H__ */
--
end-of-patch for RFC V1
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
