Hello,
after playing around for a day or so, i've come up with a new config file
for the Gigabyte B75-D3V Mainboard.
The chip in use is the it8728, and sensor input is differently wired to
other Gigabyte mainboards.
I wasn't able to ignore the sensors from pkg-*
Also the acpitz-* dies not give reasonable values, they don't change at all.
BTW: It would be nice to have a Webpage/DB to contribute configurations
utilizing a webform.
Greetings
Here it is, with most reasonable values:
# libsensors configuration file
# -----------------------------
#
# For the Gigabyte B75-D3V Rev: 1.2
#
#
#
######################################
# VOLTAGES #
# These figures are from estimations #
# based on values provided in BIOS. #
# This means that some of them may #
# be mixed up. #
######################################
##############################################
chip "it8728-isa-0a30"
# Fans
label fan1 "CPU-Fan"
set
fan1_min 1000
label fan2 "System Fan 1"
set
fan2_min 450
label fan3 "System Fan 2"
set
fan3_min 450
label fan4 "System Fan 3"
set
fan4_min 450
ignore fan5 #"Chassis Fan"
set
fan5_min 450
# Temperatures
label temp1 "CPU Chip Temperature"
set
temp1_min 10
set
temp1_max 60
ignore temp2 #"Unknown"
set
temp2_min 10
set
temp2_max 60
label temp3 "System Temperature"
set
temp3_min 10
set
temp3_max 55
# Voltages
label in1 "+3.3V"
set
in1_min 3.135
set
in1_max 3.465
compute in1 1.635*@,@/1.635
label in3 "+5V"
set
in3_min 4.750
set
in3_max 5.250
compute in3 2.5*@,@/2.5
label in2 "+12V"
set
in2_min 11.40
set
in2_max 12.60
compute in2 6.0*@,@/6.0
label in7 "3.3
VSB"
set
in7_min 3.15
set
in7_max 3.45
label in4 "Vaxg IGD"
set
in4_min 0.80
set
in4_max 1.00
label in5 "CPU
Vcore"
set
in5_min 0.75
set
in5_max 1.15
label in6 "Dram
Voltage"
set
in6_min 1.45
set
in6_max 1.55
label in0 "Vtt"
set
in0_min 1.02
set
in0_max 1.08
label in8
"Vbat"
set
in0_min 2.70
set
in0_max 3.30
# Other sensor readings
label intrusion0 "Chassis Open"
##############################################
chip "coretemp-*"
label temp1 "CPU Chip Temperature"
label temp2 "CPU Core 1 Temperature"
label temp3 "CPU Core 2 Temperature"
##############################################
chip "pkg-*"
label temp1 "ACPI Thermal CPU"
##############################################
chip "acpitz-virtual-0"
label temp1 "ACPI Thermal Zone 0
Temp1"
label temp2 "ACPI Thermal Zone 0
Temp2"
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
