### Sensors configuration for Gigabyte GA-945GCM-S2L motherboard ### 2014-02-21, ianp <snailbox88-dev -at- yahoo -dot- com> ### Thanks to Jean Delvare ### Comments are welcome. chip "it8718-*" ### Voltages label in0 "Vcore" label in1 "Vram" # "DDR18V" in BIOS label in2 "+3.3V" ignore in3 # no +5V monitor, not used label in4 "+12V" ignore in5 # these inputs ignore in6 # are not used ignore in7 # by the board ### Scale +12V. compute in4 @*3.9633, @/3.9633 ### Set in0 according to CPU VID voltage range. ### Set min and max values according to preference. set in0_min 0.850 set in0_max 1.362 set in1_min 1.8 set in1_max 1.9 set in2_min 3.3 * 0.95 set in2_max 3.3 * 1.05 set in4_min 12 * 0.95 set in4_max 12 * 1.05 ### Temperatures ### Ignore temp1 and temp2 as those aren't used. ignore temp1 ignore temp2 label temp3 "CPU Temp" ### Set according to CPU. set temp3_min 20 set temp3_max 55 ### Fans ### Ignore fan3 as it isn't used. label fan1 "CPU Fan" label fan2 "CHA Fan" ignore fan3 ### Set according to preference. set fan1_min 900 set fan2_min 0 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
