hello,
I'm having an issue getting the correct output from sensors on my asus
laptop. I'm running xubuntu on it and I've attached the following files
hoping it gives you all the information you may need.
grub - my /etc/default/grub
modules_file.txt - my /etc/modules
sensors_output.txt - output from running 'sudo sensors'
lshw_short.txt - hardware information from lshw command
Please let me know if you need more information and thank you for your
time. I greatly appreciate any advise.
Ryan
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
# GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=" radeon.dpm=1 "
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
lp
rtc
i2c-dev
i2c-i801
cpuid
# Generated by sensors-detect on Wed Jan 22 17:12:33 2014
# Chip drivers
coretemp
acpitz-virtual-0
Adapter: Virtual device
temp1: +101.0°C (crit = +108.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +33.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +27.0°C (high = +95.0°C, crit = +105.0°C)
radeon-pci-0100
Adapter: PCI adapter
temp1: -128.0°C (crit = +120.0°C, hyst = +90.0°C)
H/W path Device Class Description
======================================================
system B43J (0)
/0 bus B43J
/0/0 memory 64KiB BIOS
/0/4 processor Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz
/0/4/5 memory 32KiB L1 cache
/0/4/6 memory 256KiB L2 cache
/0/4/7 memory 3MiB L3 cache
/0/25 memory 8GiB System Memory
/0/25/0 memory 4GiB SODIMM DDR3 Synchronous 1067 MHz (0.9 ns)
/0/25/1 memory 4GiB SODIMM DDR3 Synchronous 1067 MHz (0.9 ns)
/0/100 bridge Core Processor DRAM Controller
/0/100/1 bridge Core Processor PCI Express x16 Root Port
/0/100/1/0 generic Illegal Vendor ID
/0/100/1/0.1 multimedia Cedar HDMI Audio [Radeon HD 5400/6300 Series]
/0/100/2 display Core Processor Integrated Graphics Controller
/0/100/16 communication 5 Series/3400 Series Chipset HECI Controller
/0/100/16.3 communication 5 Series/3400 Series Chipset KT Controller
/0/100/19 eth0 network 82577LM Gigabit Network Connection
/0/100/1a bus 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
/0/100/1b multimedia 5 Series/3400 Series Chipset High Definition Audio
/0/100/1c bridge 5 Series/3400 Series Chipset PCI Express Root Port 1
/0/100/1c.1 bridge 5 Series/3400 Series Chipset PCI Express Root Port 2
/0/100/1c.1/0 wlan0 network Centrino Advanced-N 6200
/0/100/1c.2 bridge 5 Series/3400 Series Chipset PCI Express Root Port 3
/0/100/1d bus 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1f bridge Mobile 5 Series Chipset LPC Interface Controller
/0/100/1f.2 storage 5 Series/3400 Series Chipset 6 port SATA AHCI Controller
/0/100/1f.3 bus 5 Series/3400 Series Chipset SMBus Controller
/0/100/1f.6 generic 5 Series/3400 Series Chipset Thermal Subsystem
/0/101 bridge Core Processor QuickPath Architecture Generic Non-core Registers
/0/102 bridge Core Processor QuickPath Architecture System Address Decoder
/0/103 bridge Core Processor QPI Link 0
/0/104 bridge Core Processor QPI Physical 0
/0/105 bridge Core Processor Reserved
/0/106 bridge Core Processor Reserved
/0/1 scsi0 storage
/0/1/0.0.0 /dev/sda disk 320GB ST9320423AS
/0/1/0.0.0/1 /dev/sda1 volume 184GiB EXT4 volume
/0/1/0.0.0/2 /dev/sda2 volume 7987MiB Extended partition
/0/1/0.0.0/2/5 /dev/sda5 volume 7987MiB Linux swap / Solaris partition
/0/1/0.0.0/3 /dev/sda3 volume 105GiB EXT4 volume
/0/2 scsi1 storage
/0/2/0.0.0 /dev/cdrom disk DVDRAM GT32N
/1 power B43-44
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
