> -----Original Message----- > From: Jean Delvare [mailto:khali@xxxxxxxxxxxx] > Sent: 18 December 2013 15:33 > To: Opensource [Anthony Olech] > Cc: Anton Vorontsov; David Woodhouse; David Dajun Chen; open list; open > list:HARDWARE MONITORING > Subject: Re: [PATCH V1] fix adc to voltage calculation in da9052 > power driver > On Wed, 18 Dec 2013 15:21:13 +0000, Anthony Olech wrote: > > The ADC resolution of the PMIC is 10-bits, this means that the maximum > > possible value is 1023 and not the 1024 as in the code. > The conversion from register value to mV depends on the ADC's LSB, not its > range. So the maximum value which can be represented is irrelevant. thanks for the speedy response, but the converted value returned by the function does depend on the scaling. For example take the two cases where value in 0x1F0, then the erroneous previous calculation yields 3469 and the new corrected calculation yields 3470 So please apply the patch as it truly fixes an error. many thanks Tony Olech > > Signed-off-by: Anthony Olech <anthony.olech.opensource@xxxxxxxxxxx> > > --- > > This patch is relative to linux-next repository tag next-20131218 > > drivers/power/da9052-battery.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/power/da9052-battery.c > > b/drivers/power/da9052-battery.c index f8f4c0f..8f0f259 100644 > > --- a/drivers/power/da9052-battery.c > > +++ b/drivers/power/da9052-battery.c > > @@ -178,7 +178,7 @@ struct da9052_battery { > > static inline int volt_reg_to_mV(int value) { > > - return ((value * 1000) / 512) + 2500; > > + return DIV_ROUND_CLOSEST(value * 2000, 1023) + 2500; > > } > > static inline int ichg_reg_to_mA(int value) > -- > Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
