On 11/14/2013 08:33 PM, Jean Delvare wrote:
> Hi Wei,
>
> On Mon, 7 Oct 2013 17:25:40 +0800, Wei Ni wrote:
>> Add OF document for LM90 in Documentation/devicetree/.
...
>> +
>> +Example LM90 node:
>> +
>> +temp-sensor {
>> + compatible = "onnn,nct1008";
>> + reg = <0x4c>;
>> + vcc-supply = <&palmas_ldo6_reg>;
>> + interrupt-parent = <&gpio>;
>> + interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
>> +}
>
> Looks good to me, just one question: is it OK that interrupt-parent is
> not described in the document? Is it supposed to be a standard property?
As Stephen said in this series v3:
"I believe it's common not to document this, since it's implicitly
supported as part of any node that is an interrupt source."
This is a standard property.
>
> I'll add this file to the LM90 entry in MAINTAINERS, so that I can pick
> this patch in my tree.
Thanks again.
Wei.
>
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
