Hi Guenter, Guenter Roeck <linux@xxxxxxxxxxxx> writes: >> Sadly (for me), you are not: I compared the GMT G751 datasheet to an >> original (1996) National semiconductor LM75 datasheet and they are >> identical. I mean both the structure and full content (text, diagrams, >> etc) is the same. Lesson learned: next time I start a driver, I will ask >> if it ressembles an existing supported chip beforehand. >> > > Hi Arnaud, > > that is interesting; I thought it is Yet Another Clone, not really exactly > the same chip. If you want to compare: http://www.ieap.uni-kiel.de/surface/ag-berndt/lehre/fpmc/ns/lm75.pdf http://natisbad.org/NAS4/refs/GMT_G751.pdf >>> Please use the lm75 driver and add the g751 parameters to it. >> >> I will test if the driver does indeed work as expected to drive the G751 >> and will send a patch to document compatibility w/ GMT G751 (Kconfig, >> i2c_device_id struct and lm75_detect function). While I am at it, if you >> see something in the patch I pushed which could be useful for current >> lm75 driver (doc, sysfs, of_ part for polarity, ...), just tell me. >> > > Depends on what you need. The fault_queue and mode sysfs attributes are neither > necessary nor acceptable - hwmon has well defined attributes, and new ones > are only added after discussion. If you _need_ to configure polarity, > interrupt mode, or fault queue depth in your application to anything but > the default, we might discuss adding those as devicetree properties. > However, you would have to make sure that it does not negatively affect > the other chips supported by the driver, and we should then discuss > if other properties should be supported as well. Overall, I strongly suspect > that the HW is happy with the default configuration. If so, we should just leave > it alone. Let's keep lm75 in I2C trivial devices list. > Power control (the shutdown attribute) should be handled through the PM > subsystem; see CONFIG_PM / CONFIG_PM_SLEEP in other drivers. If your hardware > can sleep (which may be somewhat unlikely for a NAS), lm75 driver does have #ifdef CONFIG_PM (or am I missing something?), but you are right, I don't think the NAS can take advantage of it ATM. I just finished the a first version of a patch for lm75 to reference g751. I'll send it in a separate email. Anyway, thanks for the quick feedback. Cheers, a+ _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
