I recently installed in my desktop PC a Gigabyte GA-970A-UD3 Rev 3.0 motherboard. I'd like to find a lm-sensors configuration for this motherboard, specifically, the scaling factors for the voltages. This particular board is not listed in the configurations on the lm-sensors wiki. I tried a few of the other Gigabyte configurations listed on the wiki but the results were far off. The Super I/O chip is IT8728F. I read the "voltages and scaling" page on the lm-sensors wiki. It instructs to find BIOS screenshots using Google image search. I didn't find any useful BIOS screenshots for the GA-970A-UD3. Sensors-detect ran without problem. Here is the "voltages" portion from the "sensors" command (Fedora 19, kernel 3.11.6): [root@localhost ~]# sensors k10temp-pci-00c3 Adapter: PCI adapter temp1: +21.4°C (high = +70.0°C) (crit = +80.0°C, hyst = +78.0°C) it8728-isa-0228 Adapter: ISA adapter in0: +1.01 V (min = +0.00 V, max = +3.06 V) in1: +1.50 V (min = +0.00 V, max = +3.06 V) in2: +2.06 V (min = +0.00 V, max = +3.06 V) in3: +2.00 V (min = +0.00 V, max = +3.06 V) in4: +2.00 V (min = +0.00 V, max = +3.06 V) in5: +0.48 V (min = +0.00 V, max = +3.06 V) in6: +2.22 V (min = +0.00 V, max = +3.06 V) 3VSB: +3.31 V (min = +0.00 V, max = +6.12 V) Vbat: +3.14 V This is what my BIOS reports in "PC Health Status": VCore: 1.344V Dram: 1.500V +3.3: 3.304V +5V: 5.010V +12V: 12.312V Any suggestions? _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
