Below is the configuration I developed for a Foxconn H67M-S.
There are a range of similar Foxconn boards H67M-V, H67M etc
The monitoring chip is IT8728F, which I added to the "chip" line below.
The values I'm not sure about are commented out - the PECI CPU margin is
particularly suspect.
Hope this is useful...
chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*" "it8728-*"
# WIKI says: 0 to 3.06 V, 1 bit = 12 mV
# These are configured in the same order the BIOS lists them.
# - assumption is that this map is correct!
label in0 "CPU Vcore"
# no scaling # BIOS measured: VCORE
1.152
set in0_min 0.6 # Intel. Lower level
could be 0.25
set in0_max 1.52 # Could be as high as 1.52
label in1 "DRAM voltage"
# no scaling # BIOS measured: DRAM 1.584
set in1_min 1.3
set in1_max 1.7
label in2 "+12V"
compute in2 @ * 4.28, @ / 4.28 # Empirical vs. BIOS
reading 12.126
set in2_min 11.4 # ATX V1.3 PSU design guide
set in2_max 12.6
label in3 "+5V"
compute in3 @ * 1.80, @ / 1.80 # Empirical vs. BIOS
reading 5.017
set in3_min 4.75 # ATX V1.3 PSU design guide
set in3_max 5.25
ignore in4 # unused? always 2.99
# no scaling
set in4_min 0 # Mask false alarms
set in4_max 3.06
ignore in5 # unused? always 2.99
# no scaling
set in5_min 0 # Mask false alarms
set in5_max 3.06
ignore in6 # unused? always 2.99
# no scaling
set in6_min 0 # Mask false alarms
set in6_max 3.06
#3VSB # label supplied by code
set in7_min 3.14 # ATX V1.3 PSU design guide
set in7_max 3.47
#Vbat # BIOS measures 3.264,
label by code
label fan1 "CPU fan"
set fan1_min 500
label fan2 "Chassis fan"
set fan2_min 0 # Set to 500 if you actually
monitor one
ignore fan3
set fan3_min 0 # mask false alarms
# See
http://en.wikipedia.org/wiki/Platform_Environment_Control_Interface
# label temp1 "PECI CPU margin"
ignore temp1
set temp1_max 1 # if margin > 0 losing thermal
control = throttling
set temp1_min -30
label temp2 "System temp"
set temp2_min 0
set temp2_max 55
label temp3 "CPU package temp" # Code supplies limits
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
