Using spi_w8r16be() instead of spi_w8r16() in this driver makes a code a bit
shorter and cleaner.
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
drivers/hwmon/adt7310.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/hwmon/adt7310.c b/drivers/hwmon/adt7310.c
index da5f078..5994cf6 100644
--- a/drivers/hwmon/adt7310.c
+++ b/drivers/hwmon/adt7310.c
@@ -42,13 +42,8 @@ static const u8 adt7310_reg_table[] = {
static int adt7310_spi_read_word(struct device *dev, u8 reg)
{
struct spi_device *spi = to_spi_device(dev);
- int ret;
- ret = spi_w8r16(spi, AD7310_COMMAND(reg) | ADT7310_CMD_READ);
- if (ret < 0)
- return ret;
-
- return be16_to_cpu((__force __be16)ret);
+ return spi_w8r16be(spi, AD7310_COMMAND(reg) | ADT7310_CMD_READ);
}
static int adt7310_spi_write_word(struct device *dev, u8 reg, u16 data)
--
1.8.0
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
