I want to change in5_min and in5_max. First I check that I have the right
value names:
sensors -u
...
in5:
in5_input: 2.040
in5_min: 1.224
in5_max: 2.040
in5_alarm: 1.000
...
Yes it looks that way. I try to set them in my configuration file
test@debianstick:~$ cat /etc/sensors.d/custom
chip "nct6776-isa-0290"
...
set in5_min 1.224
set in5_max 2.540
There seem to be no problem interpreting the configuration file, but only
in5_min takes affect
test@debianstick:~$ sudo sensors -s
test@debianstick:~$ sensors
...
nct6776-isa-0290
Adapter: ISA adapter
...
in5: +2.04 V (min = +1.22 V, max = +2.04 V) ALARM
...
A reboot does not help. I suspect that this is a bug, but I hope that I am
the bug. :-)
It's not important, but I thought I'd share it with the list in case
someone else stumbles over the same problem.
Best regards, Kent
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
