Guenter, Yes. Both lm75 and i2c-i801 appear when I run lsmod both of them are listed as shown below ... Module Size Used by lm75 13435 0 i2c-i801 18136 0 I also noticed that under /dev, I do not see any i2c* devices at all. By the way, I am using Fedora with kernel 3.11.1.200.fc19.x86_64. Thank you, Guenter. Benjo -----Original Message----- From: Guenter Roeck [mailto:linux@xxxxxxxxxxxx] Sent: Tuesday, September 24, 2013 5:55 PM To: Benjo Dans Cc: lm-sensors@xxxxxxxxxxxxxx Subject: Re: Tmp75 sensor installation On 09/24/2013 02:46 PM, Benjo Dans wrote: > I have a Texas Instrument Tmp75 installed on the smbus (Intel LynxPoint PCH). I have installed the following drivers: > > i2c-i801.c (make and make install) > lm75.ko (sudo insmod lm75.ko) > > I have ran "sensors" but it still cannot see my chip. I have also installed your i2c-tools but when I run i2cdetect -l, it does not detect my smbus. What drivers and/or files am I missing here? > Did you run modprobe i2c-i801 ? Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
