Dear @ll,
I am monitoring multiple systems (with Asus M5A78LE mainboards) using
sensors and Munin.
On one of the nodes, the +12 V value is constantly reported to be
+10.48 Volt which
causes Munin to report a warning (value outside 10.92 to 13.08 Volt range).
The value seems to be close to +12 V on all other nodes.
One idea was that the system reduces voltage to save power.
Therefore I caused some load on the node:
root:/home/root # md5sum /dev/urandom &
root:/home/root # md5sum /dev/urandom &
root:/home/root # md5sum /dev/urandom &
root:/home/root # md5sum /dev/urandom &
What I can see is that the 1.4 V value is now constanly at 1.38 V.
Previously, it jumped between 1.01 V and 1.38 V.
However, there is no difference in the +12 V value.
I do not understand why the 12 V value stays at such an low voltage.
May any power saving options cause that behaviour (when yes, which
settings can cause that)?
Do you have any ideas how I can localise the cause of the +10.48 Volt value?
Thanks for your help.
Best regards
Sascha Haupt
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
