Now that I can read sensors for this ASRock IMB-170 board (see list thread "Re: Cannot compile w83627ehf standalone driver"), I need to configure it. I don't see any info poking around the lm-sensors.org site or in a web search. Here is the "sensors" output (less the coretemp info) with the 3.3.4 sensors.conf.default as /etc/sensors3.conf: w83627uhg-isa-0290 Adapter: ISA adapter in0: +0.86 V (min = +0.00 V, max = +1.74 V) in1: +1.83 V (min = +0.61 V, max = +1.02 V) ALARM AVCC: +5.12 V (min = +4.49 V, max = +5.49 V) +5V: +5.14 V (min = +4.49 V, max = +5.51 V) in4: +1.71 V (min = +0.80 V, max = +0.62 V) ALARM in5: +1.70 V (min = +1.80 V, max = +1.64 V) ALARM 5VSB: +5.12 V (min = +4.49 V, max = +5.49 V) Vbat: +3.37 V (min = +2.69 V, max = +3.64 V) fan1: 0 RPM (min = 0 RPM, div = 32) ALARM fan2: 6026 RPM (min = 21093 RPM, div = 16) ALARM SYSTIN: +42.0°C (high = +1.0°C, hyst = -76.0°C) ALARM sensor = thermistor PECI Agent 1: +26.5°C (high = +80.0°C, hyst = +75.0°C) sensor = Intel PECI intrusion0: ALARM _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
