kstrtol() returns appropriate error values. Use those instead of
hardcoding. Silences several sparse messages of following type:
"why not propagate 'result' from kstrtol() instead of (-22)?"
Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
Cc: Steve Glendinning <steve.glendinning@xxxxxxxxxxx>
---
Series is compile tested.
---
drivers/hwmon/emc2103.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index b073056..2c137b2 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -248,7 +248,7 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *da,
int result = kstrtol(buf, 10, &val);
if (result < 0)
- return -EINVAL;
+ return result;
val = DIV_ROUND_CLOSEST(val, 1000);
if ((val < -63) || (val > 127))
@@ -272,7 +272,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *da,
int result = kstrtol(buf, 10, &val);
if (result < 0)
- return -EINVAL;
+ return result;
val = DIV_ROUND_CLOSEST(val, 1000);
if ((val < -63) || (val > 127))
@@ -320,7 +320,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
int status = kstrtol(buf, 10, &new_div);
if (status < 0)
- return -EINVAL;
+ return status;
if (new_div == old_div) /* No change */
return count;
@@ -394,7 +394,7 @@ static ssize_t set_fan_target(struct device *dev, struct device_attribute *da,
int result = kstrtol(buf, 10, &rpm_target);
if (result < 0)
- return -EINVAL;
+ return result;
/* Datasheet states 16384 as maximum RPM target (table 3.2) */
if ((rpm_target < 0) || (rpm_target > 16384))
@@ -440,7 +440,7 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *da,
int result = kstrtol(buf, 10, &new_value);
if (result < 0)
- return -EINVAL;
+ return result;
mutex_lock(&data->update_lock);
switch (new_value) {
--
1.7.9.5
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
