On Fri, Aug 23, 2013 at 10:38:18AM -0700, Wei Hu wrote:
> The temperature reporting interface stays the same, so we just
> add the PCI-ID to the list.
>
> Verified on AMD Olive Hill.
The Signed-off-by: statement is missing. I can not apply the patch without it.
Guenter
> ---
> Documentation/hwmon/k10temp | 1 +
> drivers/hwmon/Kconfig | 4 ++--
> drivers/hwmon/k10temp.c | 3 ++-
> 3 files changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
> index 90956b6..4dfdc8f 100644
> --- a/Documentation/hwmon/k10temp
> +++ b/Documentation/hwmon/k10temp
> @@ -12,6 +12,7 @@ Supported chips:
> * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
> * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
> * AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity"
> +* AMD Family 16h processors: "Kabini"
>
> Prefix: 'k10temp'
> Addresses scanned: PCI space
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index e989f7f..1e27838 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -296,8 +296,8 @@ config SENSORS_K10TEMP
> If you say yes here you get support for the temperature
> sensor(s) inside your CPU. Supported are later revisions of
> the AMD Family 10h and all revisions of the AMD Family 11h,
> - 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
> - microarchitectures.
> + 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and
> + 16h (Kabini) microarchitectures.
>
> This driver can also be built as a module. If so, the module
> will be called k10temp.
> diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
> index e3b037c..e633856 100644
> --- a/drivers/hwmon/k10temp.c
> +++ b/drivers/hwmon/k10temp.c
> @@ -1,5 +1,5 @@
> /*
> - * k10temp.c - AMD Family 10h/11h/12h/14h/15h processor hardware monitoring
> + * k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h processor hardware monitoring
> *
> * Copyright (c) 2009 Clemens Ladisch <clemens@xxxxxxxxxx>
> *
> @@ -211,6 +211,7 @@ static DEFINE_PCI_DEVICE_TABLE(k10temp_id_table) = {
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
> + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
> {}
> };
> MODULE_DEVICE_TABLE(pci, k10temp_id_table);
> --
> 1.7.4.4
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@xxxxxxxxxxxxxx
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
