Re: why does # of temperature sensors decrease in 3.11 (thinkfan config related)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/22/2013 06:13 PM, Guenter Roeck wrote:
> On Thu, Aug 22, 2013 at 06:09:01PM +0200, Toralf Förster wrote:
>> On 08/22/2013 09:32 AM, Jean Delvare wrote:
>>> Hi Toralf,
>>>
>>> On Sun, 11 Aug 2013 10:46:03 +0200, Toralf Förster wrote:
>>>> I'm just wondering why the # of sensors at my ThinkPad T420 lowers from
>>>> 3 in kernel 3.10 :
>>>>
>>>> sensor /sys/devices/platform/coretemp.0/temp1_input     # physical id 0
>>>> sensor /sys/devices/platform/coretemp.0/temp2_input     # core 0
>>>> sensor /sys/devices/platform/coretemp.0/temp3_input     # core 1
>>>>
>>>> to just one for 3.11:
>>>>
>>>> /sys/class/hwmon/hwmon0/temp1_input
>>>
>>> Most likely this is not even the same sensor. Check the value
>>> of /sys/class/hwmon/hwmon0/name to find out what this sensor is. Could
>>> be the graphics chip temperature readout, or an ACPI thermal zone.
>>>
>>>> Do I miss a (new ?) kernel config ?
>>>
>>> Output of "sensors" in both cases would help. Also make sure that your
>>> new kernel still has CONFIG_SENSORS_CORETEMP enabled, and that the
>>> coretemp driver is loaded if modular.
>>>
>>
>> $ zgrep CONFIG_SENSORS_CORETEMP /proc/config.gz
>> CONFIG_SENSORS_CORETEMP=m
>>
>> Ah thx - a "modprobe coretemp" helps a lot - is this new ?
>>
>> Now I do have the expected picture :
>>
>> # sensors
>> acpitz-virtual-0
>> Adapter: Virtual device
>> temp1:        +51.0°C  (crit = +98.0°C)
>>
>> thinkpad-isa-0000
>> Adapter: ISA adapter
>> fan1:        3120 RPM
>>
>> coretemp-isa-0000
>> Adapter: ISA adapter
>> Physical id 0:  +58.0°C  (high = +86.0°C, crit = +100.0°C)
>> Core 0:         +58.0°C  (high = +86.0°C, crit = +100.0°C)
>> Core 1:         +56.0°C  (high = +86.0°C, crit = +100.0°C)
>>
>>
>> Why is that module not auto loaded ? Hhm ?
>>
> It never was. Maybe your relase update replaced /etc/modules.
> 
> Guenter
> 
Hhm, under my stable 32 bit Gentoo it was automatically loaded till
3.10.8, with 3.11-rcX I've to add it now to /etc/conf.d/modules

-- 
MfG/Sincerely
Toralf Förster
pgp finger print: 7B1A 07F4 EC82 0F90 D4C2 8936 872A E508 7DB6 9DA3

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors





[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux