From: Curt Brune <curt@xxxxxxxxxxxxxxxxxxx>
In adt7470_write_word_data(), which writes two bytes using
i2c_smbus_write_byte_data(), the return codes are incorrectly AND-ed
together when they should be OR-ed together.
The return code of i2c_smbus_write_byte_data() is zero for success.
The upshot is only the first byte was ever written to the hardware.
The 2nd byte was never written out.
I noticed that trying to set the fan speed limits was not working
correctly on my system. Setting the fan speed limits is the only
code that uses adt7470_write_word_data(). After making the change
the limit settings work and the alarms work also.
Signed-off-by: Curt Brune <curt@xxxxxxxxxxxxxxxxxxx>
---
drivers/hwmon/adt7470.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 0f34bca..6099f50 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -215,7 +215,7 @@ static inline int adt7470_write_word_data(struct i2c_client *client, u8 reg,
u16 value)
{
return i2c_smbus_write_byte_data(client, reg, value & 0xFF)
- && i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+ || i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
}
static void adt7470_init_client(struct i2c_client *client)
--
1.7.10.4
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
