Hi,
I was reading the old post regarding the unsupported ITE chipset, and did a printout from my boards as well, I don't know if it helps.
# isadump -k 0x87,0x01,0x55,0x55 0x2e 0x2f 4
WARNING! Running this program can cause system crashes, data loss and worse!
I will probe address register 0x2e and data register 0x2f.
Probing bank 4 using bank register 0x07.
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 87 71 00 00 00 00 ff 0e 22 82 00 40 03 00 00 00
30: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 02 90 02 30 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 02 00 00 04 04 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 40 00 00 20 00 f0 00 01 00 00 00 00 00 00 00
# isadump 0x295 0x296
WARNING! Running this program can cause system crashes, data loss and worse!
I will probe address register 0x295 and data register 0x296.
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 19 02 ff 01 37 ff 07 37 ff 07 49 0f 00 82 ff 00
10: ff d2 5f 3b c7 80 00 00 00 ff 00 ff 9f 6f 6f 6f
20: 2f ba f2 8a ba f4 ba 8d 88 35 2e f8 80 f0 00 00
30: 7f fe af ef 0e 9f b9 ff 0d df 7b 2f 7e 78 ae 9f
40: df eb 6f b5 fd fc 5f 40 ad 6a d4 00 ff ff ff ff
50: ff 38 7f 7f 7f 40 00 00 90 00 01 12 60 00 00 00
60: 00 14 46 6a 14 41 0f ff 00 7f 7f ff 00 00 0f ff
70: 7f 7f 7f 80 00 00 0f ff ff ff ff ff ff ff ff ff
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 3c 02 04
90: ff 00 00 00 ff 00 00 00 40 00 00 00 00 b6 02 20
a0: fb f7 f7 f7 f7 f7 f7 ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
# modprobe it87 force_id=0x8721
# sensors
radeon-pci-0008
Adapter: PCI adapter
temp1: +62.0°C
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +62.5°C (high = +70.0°C)
(crit = +100.0°C, hyst = +97.0°C)
it8721-isa-0290
Adapter: ISA adapter
in0: +0.56 V (min = +3.05 V, max = +1.52 V) ALARM
in1: +2.23 V (min = +2.87 V, max = +2.10 V) ALARM
in2: +2.90 V (min = +1.91 V, max = +0.17 V) ALARM
+3.3V: +3.31 V (min = +0.00 V, max = +4.44 V) ALARM
in4: +2.23 V (min = +2.68 V, max = +0.16 V) ALARM
in5: +2.92 V (min = +0.56 V, max = +1.48 V) ALARM
in6: +2.23 V (min = +1.44 V, max = +1.51 V) ALARM
3VSB: +3.38 V (min = +3.82 V, max = +4.18 V) ALARM
Vbat: +3.26 V
fan1: 5192 RPM (min = 0 RPM)
fan2: 0 RPM (min = 16 RPM) ALARM
temp1: +53.0°C (low = -21.0°C, high = -33.0°C) ALARM sensor = thermistor
temp2: +46.0°C (low = -75.0°C, high = +111.0°C) sensor = thermistor
temp3: -8.0°C (low = -4.0°C, high = -3.0°C) sensor = thermistor
intrusion0: OK
I have total 5 of these boards, if requested I can printout from all of them.
Regards,
Sebastian
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
