-----Original Message----- From: Guenter Roeck [mailto:linux@xxxxxxxxxxxx] Sent: Wednesday, July 03, 2013 10:42 AM To: Justin Piszcz Cc: linux-kernel@xxxxxxxxxxxxxxx; lm-sensors@xxxxxxxxxxxxxx Subject: Re: 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard [ .. ] This is surprising and might be where the alarm comes from. What output do you get if you load the coretemp driver ? coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +38.0 C (high = +81.0 C, crit = +91.0 C) Core 0: +36.0 C (high = +81.0 C, crit = +91.0 C) Core 1: +35.0 C (high = +81.0 C, crit = +91.0 C) Core 2: +35.0 C (high = +81.0 C, crit = +91.0 C) Core 3: +34.0 C (high = +81.0 C, crit = +91.0 C) Core 4: +37.0 C (high = +81.0 C, crit = +91.0 C) Core 5: +38.0 C (high = +81.0 C, crit = +91.0 C) > PCH_CHIP_TEMP: +0.0 C > PCH_CPU_TEMP: +0.0 C > PCH_MCH_TEMP: +0.0 C > intrusion0: ALARM > intrusion1: ALARM Are those not connected ? The intrusion headers are not connected, also, I have not dug into it but when you try to ignore the PECI or those PCH* lm_sensors seems to ignore the rule. sensors3.conf: ignore PCH_CHIP_TEMP ignore PCH_CPU_TEMP ignore PCH_MCH_TEMP $ sensors |tail -n 4 PCH_CHIP_TEMP: +0.0 C PCH_CPU_TEMP: +0.0 C PCH_MCH_TEMP: +0.0 C Ignoring intrusion works though: ignore intrusion0 ignore intrusion1 nct6776-isa-0a30 Adapter: ISA adapter Vcore: +0.84 V (min = +0.54 V, max = +1.49 V) in1: +1.84 V (min = +1.62 V, max = +1.99 V) AVCC: +3.28 V (min = +2.98 V, max = +3.63 V) +3.3V: +3.28 V (min = +2.98 V, max = +3.63 V) in4: +1.50 V (min = +1.35 V, max = +1.65 V) in5: +1.26 V (min = +1.13 V, max = +1.38 V) in6: +1.06 V (min = +0.92 V, max = +1.34 V) 3VSB: +3.57 V (min = +2.98 V, max = +3.63 V) Vbat: +3.47 V (min = +2.70 V, max = +3.63 V) fan1: 1007 RPM (min = 700 RPM) fan2: 1317 RPM (min = 700 RPM) fan3: 1102 RPM (min = 700 RPM) fan4: 1059 RPM (min = 700 RPM) fan5: 998 RPM (min = 700 RPM) SYSTIN: +40.0 C (high = +75.0 C, hyst = +70.0 C) sensor = thermistor CPUTIN: +31.5 C (high = +95.0 C, hyst = +92.0 C) ALARM sensor = thermistor AUXTIN: +23.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor PECI Agent 0: +0.0 C (high = +95.0 C, hyst = +92.0 C) (crit = +100.0 C) PCH_CHIP_TEMP: +0.0 C PCH_CPU_TEMP: +0.0 C PCH_MCH_TEMP: +0.0 C Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
