Re: [PATCH] sensors-detect: Add detection of NCT6791D

[David Bartley <andareed@xxxxxxxxx>]

I can provide register dumps if there's interest, but it seemed like these read-only registers were mostly just copies of parts of bank 4.

On Tue, Jul 2, 2013 at 11:32 PM, killghost <killghost@xxxxxxx> wrote:

NCT6791 added 122byte read-only registers for Hardware Monitor. The base address is specified in registers

CR[64h] and CR[65h] of Logical Device B, the hardware monitor device. CR[64h] is the high byte, and CR[65h] is

the low byte. The least byte of the base address recommend to be zero. For example, {CR[64h], CR[65h]} =

{XX00h}.

who know that how to read this data? 

> Date: Wed, 3 Jul 2013 08:23:52 +0200
> From: khali@xxxxxxxxxxxx
> To: linux@xxxxxxxxxxxx
> CC: andareed@xxxxxxxxx; lm-sensors@xxxxxxxxxxxxxx

> Subject: Re: [PATCH] sensors-detect: Add detection of NCT6791D
>

> On Tue, 2 Jul 2013 19:52:30 -0700, Guenter Roeck wrote:
> > On Tue, Jul 02, 2013 at 09:10:52AM -0700, David Bartley wrote:
> > > The value of CR[20]/CR[21] on my board is 0xc8/0x03, and the physical chip
> > > itself has "NCT6791D" printed on it.
> >
> > Hi Jean and David,
> >
> > Nuvoton confirms that 0xc803 is the correct chip ID.
>
> OK, I suppose they will fix it in the next version of the datasheet.
> Meanwhile you can commit your patch.
>
> Thanks,
> --
> Jean Delvare
>

> _______________________________________________
> lm-sensors mailing list
> lm-sensors@xxxxxxxxxxxxxx
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors