Hello!
Attached you will find the configuration file for the Intel D2500CC
mini-ITX Desktop Board.
Output:
w83627uhg-isa-0290
Adapter: ISA adapter
Vcore: +1.19 V (min = +0.40 V, max = +1.60 V)
+3.3V: +3.30 V (min = +3.00 V, max = +3.61 V)
AVCC: +5.03 V (min = +4.49 V, max = +5.49 V)
+5V: +5.03 V (min = +4.49 V, max = +5.51 V)
+12V: +12.19 V (min = +10.18 V, max = +13.82 V)
Vdimm: +1.50 V (min = +1.00 V, max = +2.00 V)
5VSB: +5.03 V (min = +4.49 V, max = +5.49 V)
Vbat: +3.33 V (min = +2.69 V, max = +3.64 V)
System Fan: 1562 RPM (min = 251 RPM, div = 32)
DIMM temp: +54.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermal diode
VR temp: +42.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermal diode
Please add it to the Wiki.
Regards,
Balint Szente
# Intel D2500CC based on BIOS values
#
chip "w83627uhg-*"
ignore intrusion0
# Voltages
# Processor Vcc
label in0 "Vcore"
set in0_min 0.40
set in0_max 1.60
# +3.3V
label in1 "+3.3V"
compute in1 3.2*@, @/3.2
set in1_min 3.00
set in1_max 3.60
# +5.0V
label in3 "+5V"
set in3_min 4.60
set in3_max 5.40
# +12.0V
label in4 "+12V"
compute in4 12*@, @/12
set in4_min 10.20
set in4_max 13.80
# Memory Vcc
label in5 "Vdimm"
set in5_min 1.00
set in5_max 2.00
# +5.0V Standby
label in7 "5VSB"
set in7_min 4.60
set in7_max 5.40
# Fans
label fan1 "System Fan"
set fan1_min 250
ignore fan2
# Temperatures
# Memory Temperature
label temp1 "DIMM temp"
set temp1_max 80
set temp1_max_hyst 75
# VR Temperature
label temp2 "VR temp"
set temp2_max 80
set temp2_max_hyst 75
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
