Hello,
This is not dramatic, but I think the temperature returned by k10temp can not be
correct. The temperature is lower than the room temperature of 14°C and lower
than the more realistic values reported by it8728.
sensors
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 41.56 W (crit = 124.95 W)
it8728-isa-0228
Adapter: ISA adapter
in0: +0.92 V (min = +0.00 V, max = +3.06 V)
in1: +1.50 V (min = +0.00 V, max = +3.06 V)
in2: +2.02 V (min = +0.00 V, max = +3.06 V)
+3.3V: +3.24 V (min = +0.00 V, max = +6.12 V)
in4: +1.93 V (min = +0.00 V, max = +3.06 V)
in5: +1.26 V (min = +0.00 V, max = +3.06 V)
in6: +2.22 V (min = +0.00 V, max = +3.06 V)
3VSB: +3.38 V (min = +0.00 V, max = +6.12 V)
Vbat: +3.05 V
fan1: 15 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
temp1: +21.0°C (low = +127.0°C, high = +127.0°C) sensor =
thermistor
temp2: +28.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal
diode
temp3: +19.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal
diode
intrusion0: OK
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +8.0°C (high = +70.0°C)
(crit = +90.0°C, hyst = +87.0°C)
some system info
Linux version 3.7.10-gentoo
The 3 drivers build in the kernel, other sensors drivers compiled as modules.
*-core
description: Motherboard
product: GA-970A-DS3
vendor: Gigabyte Technology Co., Ltd.
physical id: 0
version: x.x
*-firmware
description: BIOS
vendor: Award Software International, Inc.
physical id: 0
version: F6
date: 10/23/2012
size: 128KiB
capacity: 4032KiB
capabilities: isa pci pnp upgrade shadowing cdboot bootselect
socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880
int5printscreen int9keyboard int14serial int17printer int10video acpi usb
ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: AMD FX(tm)-8120 Eight-Core Processor
vendor: Advanced Micro Devices [AMD]
physical id: 4
bus info: cpu@0
version: AMD FX(tm)-8120 Eight-Core Processor
slot: Socket M2
size: 1400MHz
capacity: 3200MHz
width: 64 bits
clock: 200MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp x86-64 constant_tsc rep_good nopl nonstop_tsc extd_apicid
aperfmperf pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 popcnt aes xsave avx
lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs xop skinit wdt lwp fma4 nodeid_msr topoext perfctr_core arat cpb
hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid
decodeassists pausefilter pfthreshold cpufreq
...
*-display UNCLAIMED
description: VGA compatible controller
product: Turks XT [Radeon HD 6670]
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master
cap_list
configuration: latency=0
resources: memory:d0000000-dfffffff memory:fddc0000-fdddffff
ioport:de00(size=256) memory:fdd00000-fdd1ffff
Was also looking why I got no information from the Radion card. sensors-detect
tells me
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc
SB600/SB700/SB800 SMBus
but does not add that module in /etc/conf.d/lm_sensors
Every time I load module i2c-piix4 I get something like
[ 2952.162696] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO
conflicts with Region \SOR1 1 (20120913/utaddress-251)
[ 2952.162708] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
in dmesg.
The wrong module or something not implemented by the OEM?
Thanks,
Dirk.
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
