Hi, Guenter Roeck <linux@xxxxxxxxxxxx> writes: > On Wed, Apr 24, 2013 at 12:06:08AM +0200, Arnaud Ebalard wrote: >> >> Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx> >> --- >> Documentation/hwmon/g762 | 67 ++++++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 67 insertions(+) >> create mode 100644 Documentation/hwmon/g762 >> >> diff --git a/Documentation/hwmon/g762 b/Documentation/hwmon/g762 >> new file mode 100644 >> index 0000000..5015829 >> --- /dev/null >> +++ b/Documentation/hwmon/g762 >> @@ -0,0 +1,67 @@ >> +Kernel driver g762 >> +================== >> + >> +This documentation is based on G760a one, GMT G762 datasheet available > > G760a ? If this refers to Documentation/hwmon/g760a, I think it is just > confusing. > >> +at http://natisbad.org/NAS/ref/GMT_EDS-762_763-080710-0.2.pdf (used >> +for the development of the driver) and sysfs bindings described in > > I would hope that you used the data sheet for the driver ;), but that > information does not add much if any value here. I would suggest > to drop it. Just point to the data sheet. > >> + fan1_gear_mode: fan gear mode. Supported values are 0, 1 and 2. Default >> + value is 0. The value is a characteristic of the system >> + and a higher value can be set for more precisely control >> + fans with a high rotation speed. Note that this affects the >> + measurable speed range, not the read value. >> + > This attribute no longer exists. All thoses will be fixed in v2. a+ _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
