Hi Arnaud,
Just a few things I noticed...
Typo in subject line: G762, not G72.
On Fri, 19 Apr 2013 00:28:21 +0200, Arnaud Ebalard wrote:
>
> Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>
> Tested-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>
> ---
> drivers/hwmon/Kconfig | 10 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/g762.c | 1159 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1170 insertions(+)
> create mode 100644 drivers/hwmon/g762.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 89ac1cb..0c6ddee 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -423,6 +423,16 @@ config SENSORS_G760A
> This driver can also be built as a module. If so, the module
> will be called g760a.
>
> +config SENSORS_G762
> + tristate "GMT G762"
> + depends on I2C
> + help
> + If you say yes here you get support for Global Mixed-mode
> + Technology Inc G762 fan speed PWM controller chips.
If your driver also supports the G763 it should be mentioned here.
> +
> + This driver can also be built as a module. If so, the module
> + will be called g762a.
This is not how your driver is actually named.
> +
> config SENSORS_GL518SM
> tristate "Genesys Logic GL518SM"
> depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 8d6d97e..4b49504 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -57,6 +57,7 @@ obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
> obj-$(CONFIG_SENSORS_FAM15H_POWER) += fam15h_power.o
> obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o
> obj-$(CONFIG_SENSORS_G760A) += g760a.o
> +obj-$(CONFIG_SENSORS_G762) += g762.o
> obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
> obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
> obj-$(CONFIG_SENSORS_GPIO_FAN) += gpio-fan.o
> diff --git a/drivers/hwmon/g762.c b/drivers/hwmon/g762.c
> new file mode 100644
> index 0000000..8c4cb39
> --- /dev/null
> +++ b/drivers/hwmon/g762.c
> (...)
> +#define DRVNAME "g762"
> +
> +static const struct i2c_device_id g762_id[] = {
> + { DRVNAME, 0 },
No, this is a list of device names, nor driver names, so the use of
DRVNAME is inappropriate. Also, again, if your driver supports the g763
it should be listed here too.
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, g762_id);
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
