On Fri, Apr 12, 2013 at 07:49:02AM +0000, BICHON, Quentin wrote: > Hi, > > Thanks a lot for your help and updates and improvements ! > The driver is working fine so far. I will provide you with feedbacks if there are any issues. > Mind if I add a Tested-by tag to the patch ? Thanks, Guenter > Best, > Quentin > > > Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. Amtsgericht M?nchen HRB 40960. Gesch?ftsf?hrer: Dr. Wolfram Tietscher. Vorsitzender des Aufsichtsrates: Edgar Frank > > -----Original Message----- > From: Guenter Roeck [mailto:linux@xxxxxxxxxxxx] > Sent: Thursday, April 11, 2013 3:48 PM > To: Jean Delvare > Cc: BICHON, Quentin; lm-sensors@xxxxxxxxxxxxxx > Subject: Re: request for TMP432 > > On Thu, Apr 11, 2013 at 10:36:19AM +0200, Jean Delvare wrote: > > Hi Quentin, > > > > On Thu, 11 Apr 2013 08:15:10 +0000, BICHON, Quentin wrote: > > > This stand-alone driver is very appreciated by the team, however they are using the following kernel version: > > > Linux version 2.6.32.27-Cavium-Octeon And the code on the driver is > > > apparently not compatible. > > > > > > Do you know if some minor changes could fix this? > > > > Most certainly yes. The same problem happens for every single driver > > and so far I have always been able to add compatibility code to make > > it work. For all i2c-related compatibility issues I have a separate > > header file common to all the drivers I maintain. The latest version > > can be seen at: > > > > http://khali.linux-fr.org/devel/misc/adt7410/i2c-compat.h > > > > So adding this file and the following line near the top of the tmp401 > > driver should solve most issues: > > > > #include "i2c-compat.h" > > > > Quentin, > > I added Jean's file (with some additions) to the repo, so all your engineers should have to do is to run "git update" and rebuild. > > > There may be a few remaining issues left, I'll leave them to Guenter. > > > > Quentin, your testing is very appreciated. Would you or someone in > > your team also be able to review Guenter's patches? This would speed > > up upstream integration. > > > Yes, that would be very helpful. > > Thanks, > Guenter > > _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
