Anton,
Guenter has acked [4/5] and [5/5], did you try to merge these patches?
If there is any conflict please let me know.
Thanks.
On 3 April 2013 20:18, Hongbo Zhang <hongbo.zhang@xxxxxxxxxx> wrote:
Guenter and Anton,
As suggested by Anton, I rebased these patches to his latest battery-2.6 tree.
Thanks.
v7 -> v8 changes:
- rebase these patches to Anton's latest battery-2.6 tree.
v6 -> v7 changes:
- move exporting symbols from [5/5] to [4/5], which was a mistake.
v5 -> v6 changes:
- add depend on AB8500_BM in Kconfig
- fix wrong usage of clamp_val()
- export symbols for module compiling
v4 -> v5 changes:
- split the old [2/3]-ab8500-re-arrange-ab8500-power-and-temperature-data into
new three [2/5], [3/5] and [4/5] patches.
- hwmon driver minor coding style clean ups:
- {} usage in if-else statement in ab8500_read_sensor function
- index error fix in gpadc_monitor function
- fix issue of clamp_val() usage
- remove unnecessary else in function abx500_attrs_visible
- remove redundant print message about irq set up
- return the calling function return value directly in probe function
v3 -> v4 changes:
for patch [3/3]
- define delays in HZ
- update ab8500_read_sensor function, returning temp by parameter
- remove ab8500_is_visible function
- use clamp_val in set_min and set_max callback
- remove unnecessary locks in remove and suspend functions
- let abx500 and ab8500 use its own data structure
for patch [2/3]
- move the data tables from driver/power/ab8500_bmdata.c to
include/linux/power/ab8500.h
- rename driver/power/ab8500_bmdata.c to driver/power/ab8500_bm.c
- rename these variable names to eliminate CamelCase warnings
- add const attribute to these data
v2 -> v3 changes:
- Add interface for converting voltage to temperature
- Remove temp5 sensor since we cannot offer temperature read interface of it
- Update hyst to use absolute temperature instead of a difference
- Add the 3/3 patch
v1 -> v2 changes:
- Add Documentation/hwmon/abx500 and Documentation/hwmon/abx500
- Make devices which cannot report milli-Celsius invisible
- Add temp5_crit interface
- Re-work the old find_active_thresholds() to threshold_updated()
- Reset updated_min_alarm and updated_max_alarm at the end of each loop
- Update the hyst mechamisn to make it works as real hyst
- Remove non-stand attributes
- Re-order the operations sequence inside probe and remove functions
- Update all the lock usages to eliminate race conditions
- Make attibutes index starts from 0
also changes:
- Since the old [1/2] "ARM: ux500: rename ab8500 to abx500 for hwmon driver"
has been merged by Samuel, so won't send it again.
- Add another new patch "ab8500_btemp: export two symblols" as [2/2] of this
patch set.
Hongbo Zhang (5):
ab8500_btemp: make ab8500_btemp_get* interfaces public
ab8500: power: eliminate CamelCase warning of some variables
ab8500: power: add const attributes to some data arrays
ab8500: power: export abx500_res_to_temp tables for hwmon
hwmon: add ST-Ericsson ABX500 hwmon driver
Documentation/hwmon/ab8500 | 22 ++
Documentation/hwmon/abx500 | 28 ++
drivers/hwmon/Kconfig | 13 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/ab8500.c | 206 +++++++++++++++
drivers/hwmon/abx500.c | 491 +++++++++++++++++++++++++++++++++++
drivers/hwmon/abx500.h | 69 +++++
drivers/power/ab8500_bmdata.c | 44 ++--
drivers/power/ab8500_btemp.c | 5 +-
drivers/power/ab8500_fg.c | 4 +-
include/linux/mfd/abx500.h | 6 +-
include/linux/mfd/abx500/ab8500-bm.h | 1 +
include/linux/power/ab8500.h | 16 ++
13 files changed, 882 insertions(+), 24 deletions(-)
create mode 100644 Documentation/hwmon/ab8500
create mode 100644 Documentation/hwmon/abx500
create mode 100644 drivers/hwmon/ab8500.c
create mode 100644 drivers/hwmon/abx500.c
create mode 100644 drivers/hwmon/abx500.h
create mode 100644 include/linux/power/ab8500.h
--
1.8.0
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
