Re: IT8772E Test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It's ACPI:

it87: Found IT8772F chip at 0xa30, revision 0
ACPI Warning: 0x0000000000000a35-0x0000000000000a36 SystemIO conflicts with Region \_SB_.PCI0.SBRG.LBAE 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

No idea what this is. Will running acpid help?





On Wed, Apr 3, 2013 at 8:52 PM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
On Wed, Apr 03, 2013 at 07:24:07PM -0700, James Webb wrote:
> Running a Dell XPS-8300
> sensors-detect reports:
> Found `ITE IT8772E Super IO Sensors'                        Success!
>     (address 0xa30, driver `to-be-written')
> Compiled standalone driver but either modprobe it87 or modprobe it87
> force_id=0x8721 results in:
> FATAL: Error inserting it87
> (/lib/modules/3.8.5-gentoo/kernel/drivers/hwmon/it87.ko): Device or
> resource busy
>
> Any suggestions?
>
Some other device has its io memory space reserved, or the io memory
space is reserved by ACPI (which is more likely). In the latter case,
you should see an acpi resource conflict message on the console
(or with dmesg).  Otherwise, 'cat /proc/ioports' should give you
an idea about the offending driver.

Guenter

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux