Lars-Peter Clausen schrieb:
> This allows an userspace application to poll() on the alarm files to get
> notified in case of a temperature threshold event.
>
> Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
Reviewed-by: Hartmut Knaack <knaack.h@xxxxxx>
>
> ---
> Changes since v2:
> * None
> Changes since v1:
> * Switch from level triggered and interrupt mode to edge triggered and
> comparator mode. In interrupt mode the status register get's cleared after
> the first read and so the _alarm files will always read 0, which is not
> really what we want.
> * Use dev_name(dev) for the interrupt name, instead of 'name' which will be
> NULL for I2C devices
> ---
> drivers/hwmon/adt7310.c | 4 ++--
> drivers/hwmon/adt7410.c | 4 ++--
> drivers/hwmon/adt7x10.c | 41 ++++++++++++++++++++++++++++++++++++++---
> drivers/hwmon/adt7x10.h | 4 ++--
> 4 files changed, 44 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/hwmon/adt7310.c b/drivers/hwmon/adt7310.c
> index f8ea629..b70a481 100644
> --- a/drivers/hwmon/adt7310.c
> +++ b/drivers/hwmon/adt7310.c
> @@ -90,13 +90,13 @@ static const struct adt7x10_ops adt7310_spi_ops = {
>
> static int adt7310_spi_probe(struct spi_device *spi)
> {
> - return adt7x10_probe(&spi->dev, spi_get_device_id(spi)->name,
> + return adt7x10_probe(&spi->dev, spi_get_device_id(spi)->name, spi->irq,
> &adt7310_spi_ops);
> }
>
> static int adt7310_spi_remove(struct spi_device *spi)
> {
> - return adt7x10_remove(&spi->dev);
> + return adt7x10_remove(&spi->dev, spi->irq);
> }
>
> static const struct spi_device_id adt7310_id[] = {
> diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
> index d294445..0dc066a 100644
> --- a/drivers/hwmon/adt7410.c
> +++ b/drivers/hwmon/adt7410.c
> @@ -47,12 +47,12 @@ static int adt7410_i2c_probe(struct i2c_client *client,
> I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
> return -ENODEV;
>
> - return adt7x10_probe(&client->dev, NULL, &adt7410_i2c_ops);
> + return adt7x10_probe(&client->dev, NULL, client->irq, &adt7410_i2c_ops);
> }
>
> static int adt7410_i2c_remove(struct i2c_client *client)
> {
> - return adt7x10_remove(&client->dev);
> + return adt7x10_remove(&client->dev, client->irq);
> }
>
> static const struct i2c_device_id adt7410_ids[] = {
> diff --git a/drivers/hwmon/adt7x10.c b/drivers/hwmon/adt7x10.c
> index 84b3dfc..98141f4 100644
> --- a/drivers/hwmon/adt7x10.c
> +++ b/drivers/hwmon/adt7x10.c
> @@ -30,6 +30,7 @@
> #include <linux/err.h>
> #include <linux/mutex.h>
> #include <linux/delay.h>
> +#include <linux/interrupt.h>
>
> #include "adt7x10.h"
>
> @@ -112,6 +113,25 @@ static const u8 ADT7X10_REG_TEMP[4] = {
> ADT7X10_T_CRIT, /* critical */
> };
>
> +static irqreturn_t adt7x10_irq_handler(int irq, void *private)
> +{
> + struct device *dev = private;
> + int status;
> +
> + status = adt7x10_read_byte(dev, ADT7X10_STATUS);
> + if (status < 0)
> + return IRQ_HANDLED;
> +
> + if (status & ADT7X10_STAT_T_HIGH)
> + sysfs_notify(&dev->kobj, NULL, "temp1_max_alarm");
> + if (status & ADT7X10_STAT_T_LOW)
> + sysfs_notify(&dev->kobj, NULL, "temp1_min_alarm");
> + if (status & ADT7X10_STAT_T_CRIT)
> + sysfs_notify(&dev->kobj, NULL, "temp1_crit_alarm");
> +
> + return IRQ_HANDLED;
> +}
> +
> static int adt7x10_temp_ready(struct device *dev)
> {
> int i, status;
> @@ -359,7 +379,7 @@ static const struct attribute_group adt7x10_group = {
> .attrs = adt7x10_attributes,
> };
>
> -int adt7x10_probe(struct device *dev, const char *name,
> +int adt7x10_probe(struct device *dev, const char *name, int irq,
> const struct adt7x10_ops *ops)
> {
> struct adt7x10_data *data;
> @@ -387,8 +407,10 @@ int adt7x10_probe(struct device *dev, const char *name,
> * Set to 16 bit resolution, continous conversion and comparator mode.
> */
> data->config = data->oldconfig;
> - data->config &= ~ADT7X10_MODE_MASK;
> + data->config &= ~(ADT7X10_MODE_MASK | ADT7X10_CT_POLARITY |
> + ADT7X10_INT_POLARITY);
> data->config |= ADT7X10_FULL | ADT7X10_RESOLUTION | ADT7X10_EVENT_MODE;
> +
> if (data->config != data->oldconfig) {
> ret = adt7x10_write_byte(dev, ADT7X10_CONFIG, data->config);
> if (ret)
> @@ -422,8 +444,18 @@ int adt7x10_probe(struct device *dev, const char *name,
> goto exit_remove_name;
> }
>
> + if (irq > 0) {
> + ret = request_threaded_irq(irq, NULL, adt7x10_irq_handler,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + dev_name(dev), dev);
> + if (ret)
> + goto exit_hwmon_device_unregister;
> + }
> +
> return 0;
>
> +exit_hwmon_device_unregister:
> + hwmon_device_unregister(data->hwmon_dev);
> exit_remove_name:
> if (name)
> device_remove_file(dev, &dev_attr_name);
> @@ -435,10 +467,13 @@ exit_restore:
> }
> EXPORT_SYMBOL_GPL(adt7x10_probe);
>
> -int adt7x10_remove(struct device *dev)
> +int adt7x10_remove(struct device *dev, int irq)
> {
> struct adt7x10_data *data = dev_get_drvdata(dev);
>
> + if (irq > 0)
> + free_irq(irq, dev);
> +
> hwmon_device_unregister(data->hwmon_dev);
> if (data->name)
> device_remove_file(dev, &dev_attr_name);
> diff --git a/drivers/hwmon/adt7x10.h b/drivers/hwmon/adt7x10.h
> index 803d9b9..d491c69 100644
> --- a/drivers/hwmon/adt7x10.h
> +++ b/drivers/hwmon/adt7x10.h
> @@ -23,9 +23,9 @@ struct adt7x10_ops {
> int (*write_word)(struct device *, u8 reg, u16 data);
> };
>
> -int adt7x10_probe(struct device *dev, const char *name,
> +int adt7x10_probe(struct device *dev, const char *name, int irq,
> const struct adt7x10_ops *ops);
> -int adt7x10_remove(struct device *dev);
> +int adt7x10_remove(struct device *dev, int irq);
>
> #ifdef CONFIG_PM_SLEEP
> extern const struct dev_pm_ops adt7x10_dev_pm_ops;
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
