I have an AMD Phenom II x4 that will show the individual core temps in a few utilities in windows but for the life of me I can't get lm_sensors to display them. I'm using the k10temp and w83627dhg-isa-0290 modules. This is for Fedora 17 lm_sensors version 3.3.2 kernel 3.7.9-104.fc17.x86_64. Here's what I'm seeing at the moment:
# sensors
k10temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +0.0°C (high = +70.0°C)
w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.35 V (min = +0.00 V, max = +1.74 V)
in1: +0.33 V (min = +0.58 V, max = +1.10 V) ALARM
AVCC: +3.33 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.33 V (min = +2.98 V, max = +3.63 V)
in4: +1.84 V (min = +0.49 V, max = +0.90 V) ALARM
in5: +1.68 V (min = +1.48 V, max = +0.06 V) ALARM
in6: +1.66 V (min = +1.71 V, max = +0.09 V) ALARM
3VSB: +3.46 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.42 V (min = +2.70 V, max = +3.63 V)
fan1: 0 RPM (min = 10546 RPM, div = 128) ALARM
fan2: 4440 RPM (min = 12980 RPM, div = 8) ALARM
fan3: 0 RPM (min = 0 RPM, div = 128)
fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM
temp1: +41.0°C (high = -40.0°C, hyst = +21.0°C) ALARM sensor = thermistor
temp2: +49.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
temp3: +31.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
intrusion0: ALARM
Any help would be appreciated, thanks.
Sam P
Sam P
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
