I have an ASRock 990FX Extreme3 board that I'd REALLY like to be able to
monitor the temperature of. I'm no expert at lmsensors and despite days of
effort, I cannot determine how to configure lmsensors for this board. My temps
dont match the hardware monitor in the bios. Some of the fans and voltages are
also wrong.
I'd be willing to pay for some effective advice or a config file for this board.
I appreciate any help.
thanks
Fred
sample output of sensors after running sensors-detect
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 37.73 W (crit = 124.95 W)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +20.6°C (high = +70.0°C)
(crit = +70.0°C, hyst = +67.0°C)
radeon-pci-0100
Adapter: PCI adapter
temp1: +56.5°C
nct6776-isa-0290
Adapter: ISA adapter
Vcore: +0.92 V (min = +0.00 V, max = +1.74 V)
in1: +1.86 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.28 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.28 V (min = +2.98 V, max = +3.63 V)
in4: +1.51 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +1.74 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.47 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.38 V (min = +2.70 V, max = +3.63 V)
fan1: 0 RPM (min = 0 RPM) ALARM
fan2: 2036 RPM (min = 0 RPM) ALARM
fan3: 0 RPM (min = 0 RPM) ALARM
fan4: 0 RPM (min = 0 RPM) ALARM
fan5: 0 RPM (min = 0 RPM) ALARM
SYSTIN: +45.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor =
thermistor
CPUTIN: +38.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN: +2.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
cpu0_vid: +0.000 V
intrusion0: ALARM
intrusion1: ALARM
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
