my cufan makes a big noise, while temp onstantly goes up into 60's and upto 80 C, even if i am doing mnial work.
i have an i7 and here is my mother bord configuration below,
ihave installed lm-sensors but when i run pwmconfig,i get 'no sensors detected'.
here is motherboard info:
sudo hwinfo --bios
01: None 00.0: 10105 BIOS
[Created at bios.186]
Unique ID: rdCR.lZF+r4EgHp4
Hardware Class: bios
BIOS Keyboard LED Status:
Scroll Lock: off
Num Lock: off
Caps Lock: off
Base Memory: 634 kB
PnP BIOS: @@@0000
BIOS: extended read supported
MP spec rev 1.4 info:
OEM id: "PEGANB"
Product id: "PEGA"
2 CPUs (0 disabled)
SMBIOS Version: 2.6
BIOS Info: #0
Vendor: "American Megatrends Inc."
Version: "300"
Date: "12/22/2011"
Start Address: 0xf0000
ROM Size: 2048 kB
Features: 0x0503000000053f899880
PCI supported
BIOS flashable
BIOS shadowing allowed
CD boot supported
Selectable boot supported
EDD spec supported
1.2MB Floppy supported
720kB Floppy supported
2.88MB Floppy supported
Print Screen supported
8042 Keyboard Services supported
Serial Services supported
Printer Services supported
ACPI supported
USB Legacy supported
BIOS Boot Spec supported
Processor Info: #4
Socket: "CPU 1"
Socket Type: 0x01 (Other)
Socket Status: Populated
Type: 0x03 (CPU)
Family: 0xc2 (Other)
Manufacturer: "Intel"
Version: "Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz"
Serial: "To Be Filled By O.E.M."
Asset Tag: "To Be Filled By O.E.M."
Part Number: "To Be Filled By O.E.M."
Processor ID: 0xbfebfbff000206a7
Status: 0x01 (Enabled)
External Clock: 100 MHz
Max. Speed: 4000 MHz
Current Speed: 2400 MHz
L1 Cache: #5
L2 Cache: #6
Cache Info: #5
Designation: "L1-Cache"
Level: L1
State: Enabled
Mode: 0x01 (Write Back)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x03 (None)
Type: 0xff (Other)
Supported SRAM Types: 0x0001 (Other)
Current SRAM Type: 0x0001 (Other)
Cache Info: #6
Designation: "L2-Cache"
Level: L2
State: Enabled
Mode: 0x02 (Varies with Memory Address)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x03 (None)
Type: 0xff (Other)
Supported SRAM Types: 0x0001 (Other)
Current SRAM Type: 0x0001 (Other)
Inactive Record: #7
Data 00: 7e 13 07 00 01 02 03 00 00 00 00 02 00 02 00 00
Data 10: 02 02 02
String 1: "L3-Cache"
Port Connector: #8
Type: 0x0e (Mouse Port)
Internal Designator: "J1A1"
External Designator: "PS2Mouse"
External Connector: 0x0f (PS/2)
Port Connector: #9
Type: 0x0d (Keyboard Port)
Internal Designator: "J1A1"
External Designator: "Keyboard"
External Connector: 0x0f (PS/2)
Port Connector: #10
Type: 0x09 (Serial Port 16550A Compatible)
Internal Designator: "J1A2A"
External Designator: "Serial Port"
External Connector: 0x08 (DB-9 pin male)
Port Connector: #11
Type: 0x1c (Video Port)
Internal Designator: "J1A2B"
External Designator: "Video"
External Connector: 0x07 (DB-15 pin female)
Port Connector: #12
Type: 0x1c (Video Port)
Internal Designator: "J3A2"
External Designator: "HDMI"
External Connector: 0xff (Other)
Port Connector: #13
Type: 0x10 (USB)
Internal Designator: "J3A3"
External Designator: "USB1"
External Connector: 0x12 (Access Bus [USB])
Port Connector: #14
Type: 0x10 (USB)
Internal Designator: "J3A3"
External Designator: "USB2"
External Connector: 0x12 (Access Bus [USB])
Port Connector: #15
Type: 0x10 (USB)
Internal Designator: "J3A3"
External Designator: "USB3"
External Connector: 0x12 (Access Bus [USB])
Port Connector: #16
Type: 0x10 (USB)
Internal Designator: "J3A3"
External Designator: "USB4"
External Connector: 0x12 (Access Bus [USB])
Port Connector: #17
Type: 0x10 (USB)
Internal Designator: "J4A1"
External Designator: "USB5"
External Connector: 0x12 (Access Bus [USB])
Port Connector: #18
Type: 0x10 (USB)
Internal Designator: "J4A1"
External Designator: "USB6"
External Connector: 0x12 (Access Bus [USB])
Port Connector: #19
Type: 0x1f (Network Port)
Internal Designator: "J4A1"
External Designator: "LAN"
External Connector: 0x0b (RJ-45)
Port Connector: #20
Type: 0xff (Other)
Internal Designator: "J5A1"
External Designator: "Motherboard DP"
External Connector: 0xff (Other)
Port Connector: #21
Type: 0x20 (Other)
Internal Designator: "J8J1"
External Designator: "SATA Port 0 Direct Connect"
External Connector: 0x22 (Other)
Port Connector: #22
Type: 0x20 (Other)
Internal Designator: "J7J1"
External Designator: "eSATA Port 4"
External Connector: 0x22 (Other)
Port Connector: #23
Type: 0x20 (Other)
Internal Designator: "J6J1"
External Designator: "eSATA Port 3"
External Connector: 0x22 (Other)
Port Connector: #24
Type: 0xff (Other)
Internal Designator: "J1F2"
External Designator: "AC IN"
External Connector: 0xff (Other)
Port Connector: #25
Type: 0xff (Other)
Internal Designator: "J5B1 - PCH JTAG"
Internal Connector: 0xff (Other)
Port Connector: #26
Type: 0xff (Other)
Internal Designator: "J9A1 - TPM/PORT 80"
Internal Connector: 0xff (Other)
Port Connector: #27
Type: 0xff (Other)
Internal Designator: "J9E4 - HDA 2X8 Header"
Internal Connector: 0xff (Other)
Port Connector: #28
Type: 0xff (Other)
Internal Designator: "J9E7 - HDA 8Pin Header"
Internal Connector: 0xff (Other)
Port Connector: #29
Type: 0xff (Other)
Internal Designator: "J8F1 - HDA HDMI"
Internal Connector: 0xff (Other)
Port Connector: #30
Type: 0xff (Other)
Internal Designator: "J9E3 - Scan Matrix Keyboard"
Internal Connector: 0xff (Other)
Port Connector: #31
Type: 0xff (Other)
Internal Designator: "J8E1 - SPI Program"
Internal Connector: 0xff (Other)
Port Connector: #32
Type: 0xff (Other)
Internal Designator: "J9E5 - LPC Hot Docking"
Internal Connector: 0xff (Other)
Port Connector: #33
Type: 0xff (Other)
Internal Designator: "J9G2 - LPC SIDE BAND"
Internal Connector: 0xff (Other)
Port Connector: #34
Type: 0xff (Other)
Internal Designator: "J8F2 - LPC Slot"
Internal Connector: 0xff (Other)
Port Connector: #35
Type: 0xff (Other)
Internal Designator: "J8H3 - PCH XDP"
Internal Connector: 0xff (Other)
Port Connector: #36
Type: 0x20 (Other)
Internal Designator: "J7G1 - SATA Port 2"
Internal Connector: 0x22 (Other)
Port Connector: #37
Type: 0x20 (Other)
Internal Designator: "J7G2 - SATA Port 1"
Internal Connector: 0x22 (Other)
Port Connector: #38
Type: 0xff (Other)
Internal Designator: "J6H1 - SATA Power"
Internal Connector: 0xff (Other)
Port Connector: #39
Type: 0xff (Other)
Internal Designator: "J5J1 - FP Header"
Internal Connector: 0xff (Other)
Port Connector: #40
Type: 0xff (Other)
Internal Designator: "J4H1 - ATX Power"
Internal Connector: 0xff (Other)
Port Connector: #41
Type: 0xff (Other)
Internal Designator: "J1J3 - AVMC"
Internal Connector: 0xff (Other)
Port Connector: #42
Type: 0xff (Other)
Internal Designator: "J1H1 - BATT B"
Internal Connector: 0xff (Other)
Port Connector: #43
Type: 0xff (Other)
Internal Designator: "J1H2 - BATT A"
Internal Connector: 0xff (Other)
Port Connector: #44
Type: 0xff (Other)
Internal Designator: "J2G1 - CPU Fan"
Internal Connector: 0xff (Other)
Port Connector: #45
Type: 0xff (Other)
Internal Designator: "J1D3 - XDP"
Internal Connector: 0xff (Other)
Port Connector: #46
Type: 0xff (Other)
Internal Designator: "J4V1 - Memory Slot 1"
Internal Connector: 0xff (Other)
Port Connector: #47
Type: 0xff (Other)
Internal Designator: "J4V2 - Memory Slot 2"
Internal Connector: 0xff (Other)
Port Connector: #48
Type: 0xff (Other)
Internal Designator: "J4C1 - FAN PWR"
Internal Connector: 0xff (Other)
System Slot: #49
Designation: "J5C1"
Type: 0xaa (Other)
Bus Width: 0x0d (Other)
Status: 0x03 (Available)
Length: 0x04 (Long)
Slot ID: 0
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #50
Designation: "J6C2"
Type: 0xa5 (Other)
Bus Width: 0x08 (Other)
Status: 0x03 (Available)
Length: 0x03 (Short)
Slot ID: 1
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #51
Designation: "J6D2"
Type: 0xa5 (Other)
Bus Width: 0x08 (Other)
Status: 0x04 (In Use)
Length: 0x03 (Short)
Slot ID: 2
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #52
Designation: "J7C1"
Type: 0xa5 (Other)
Bus Width: 0x08 (Other)
Status: 0x03 (Available)
Length: 0x03 (Short)
Slot ID: 3
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #53
Designation: "J7D2"
Type: 0xa5 (Other)
Bus Width: 0x08 (Other)
Status: 0x04 (In Use)
Length: 0x03 (Short)
Slot ID: 4
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #54
Designation: "J6C1"
Type: 0xa5 (Other)
Bus Width: 0x08 (Other)
Status: 0x03 (Available)
Length: 0x03 (Short)
Slot ID: 5
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #55
Designation: "J8C2"
Type: 0xaa (Other)
Bus Width: 0x05 (32 bit)
Status: 0x04 (In Use)
Length: 0x04 (Long)
Slot ID: 6
Characteristics: 0x010c (3.3 V, Shared, PME#)
On Board Devices: #60
Video: "To Be Filled By O.E.M."
On Board Devices: #61
Ethernet: "To Be Filled By O.E.M." (disabled)
On Board Devices: #62
Sound: "To Be Filled By O.E.M."
OEM Strings: #63
System Config Options (Jumpers & Switches) #64:
DSN:
32bit-Memory Error Info: #66
Type: 0x03 (OK)
Granularity: 0x02 (Unknown)
Operation: 0x02 (Unknown)
32bit-Memory Error Info: #69
Type: 0x03 (OK)
Granularity: 0x02 (Unknown)
Operation: 0x02 (Unknown)
32bit-Memory Error Info: #72
Type: 0x03 (OK)
Granularity: 0x02 (Unknown)
Operation: 0x02 (Unknown)
Pointing Device: #74
Type: 0x07 (Touch Pad)
Interface: 0x04 (PS/2)
Buttons: 2
Type 32 Record: #75
Data 00: 20 14 4b 00 00 00 00 00 00 00 00 00 00 00 00 00
Data 10: 00 00 00 00
System Info: #1
Manufacturer: "NOVATECH LTD"
Product: "A15A/HE/HC"
Version: "1.0"
Serial: "11APE2083146"
UUID: undefined, but settable
Wake-up: 0x06 (Power Switch)
Board Info: #2
Manufacturer: "Novatech Ltd"
Product: "A15"
Version: "1.0"
Serial: "BSN12345678901234567"
Asset Tag: "ATN12345678901234567"
Type: 0x0a (Motherboard)
Features: 0x09
Hosting Board
Replaceable
Location: "MIDDLE"
Chassis: #3
Chassis Info: #3
Manufacturer: "Novatech Ltd"
Version: "1.0"
Serial: "CSN12345678901234567"
Asset Tag: "No Asset Tag"
Type: 0x09 (LapTop)
Bootup State: 0x03 (Safe)
Power Supply State: 0x03 (Safe)
Thermal State: 0x03 (Safe)
Security Status: 0x03 (None)
Physical Memory Array: #65
Use: 0x03 (System memory)
Location: 0x03 (Motherboard)
Slots: 2
Max. Size: 8 GB
ECC: 0x03 (None)
Error Info: #66
Memory Device: #67
Location: "DIMM0"
Bank: "BANK 0"
Manufacturer: "80CE"
Serial: "65628DA3"
Asset Tag: "Unknown"
Part Number: "M471B5273CH0-CH9"
Memory Array: #65
Error Info: #69
Form Factor: 0x0d (SODIMM)
Type: 0x18 (Other)
Type Detail: 0x0080 (Synchronous)
Data Width: 64 bits
Size: 4 GB
Speed: 1333 MHz
Memory Device Mapping: #68
Memory Device: #67
Array Mapping: #73
Interleave Pos: 1
Interleaved Depth: 1
Start Address: 0x0000000000000000
End Address: 0x0000000100000000
Memory Device: #70
Location: "DIMM2"
Bank: "BANK 2"
Manufacturer: "80CE"
Serial: "62477F22"
Asset Tag: "Unknown"
Part Number: "M471B5273DH0-CH9"
Memory Array: #65
Error Info: No Error
Form Factor: 0x0d (SODIMM)
Type: 0x18 (Other)
Type Detail: 0x0080 (Synchronous)
Data Width: 64 bits
Size: 4 GB
Speed: 1333 MHz
Memory Device Mapping: #71
Memory Device: #70
Array Mapping: #73
Interleave Pos: 2
Interleaved Depth: 1
Start Address: 0x0000000000000000
End Address: 0x0000000100000000
Memory Array Mapping: #73
Memory Array: #65
Partition Width: 2
Start Address: 0x0000000000000000
End Address: 0x0000000100000000
Language Info: #76
Languages: eng
Current: eng
Config Status: cfg=new, avail=yes, need=no, active=unknown
when i use sensors ,i get,
acpitz-virtual-0
Adapter: Virtual device
temp1: +56.0°C (crit = +99.0°C)
when i use sensors-detect and and say yes to every step,i get,
# sensors-detect revision 6085 (2012-10-30 18:18:45 +0100)
# System: NOVATECH LTD A15A/HE/HC [1.0] (laptop)
# Board: Novatech Ltd A15
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... Yes
Found unknown chip with ID 0x0202
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH)
Module i2c-dev loaded successfully.
Next adapter: SMBus I801 adapter at e040 (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Next adapter: i915 gmbus ssc (i2c-1)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus vga (i2c-2)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus panel (i2c-3)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpc (i2c-4)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpb (i2c-5)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpd (i2c-6)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: DPDDC-D (i2c-7)
Do you want to scan it? (YES/no/selectively): y
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Do you want to overwrite /etc/conf.d/lm_sensors? (YES/no): y
Unloading i2c-dev... OK
Unloading cpuid... OK
i am getting high cpu temperatures and i feel fan speed is toohigh and uncontrolled.
facontrolis installed but i cannot use it.
i am unable to controlcu emp and fan speed
pleae give us a steby step apprach to correct the problem.
sinc,
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
