Il 26/12/2012 21:11, Andrey Repin ha scritto:
I'm writing because I need help to configure lm-sensors to work on an
old Asus TUSL2-C motherboard. I read a lot of documentation on
lm-sensors website and wiki and I did some searches with Google, however
I can't understand what I'm doing wrong.
Have you tried downloading newer sensors-detect script from the website?
Hi Andrey, thanks for your help!
I just downloaded the latest version of sensors-detect from here:
http://www.lm-sensors.org/wiki/iwizard/NoSensorsDetected
Some progress is made compared to the version I have in my Linux
distribution, because the latest script says:
Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
Found unknown chip with ID 0x5953
(logical device 9 has address 0x290, could be sensors)
However, later it still says:
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
And finally again:
Sorry, no sensors were detected.
So, it seems like something is present at 0x290, but nothing lm-sensors
can detect. The strange thing is that from what I read on the Internet
(as stated in my previous mail message), my mainboard (Asus TUSL2-C)
should actually have a AS99127F chip, supported by the w83781d driver.
Please note I have the following warning message at boot:
[ 10.092229] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 10.092243] ACPI: I/O resource 0000:00:1f.3 [0xe800-0xe80f] conflicts
with ACPI region SM00 [0xe800-0xe806]
[ 10.092291] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
However I did some research on the Internet and found out that this
should not be a problem and simply means that the native driver is not
used, because an AHCI interface to the i801 SMBus device is available.
Actually, the sensors-detect correctly queries that device:
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801BA ICH2
but it still doesn't find any sensor there, however I don't think this
is in any way related to my problem.
Any suggestion?
Mauro
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
