Guenter Roeck schrieb: > On Wed, Dec 12, 2012 at 11:08:23AM +0100, Lars-Peter Clausen wrote: >> Added Guenter Roeck to Cc, since he merged the hwmon patch. >> >> On 12/12/2012 09:59 AM, Jonathan Cameron wrote: >>> On 11/12/12 20:10, Lars-Peter Clausen wrote: >>>> On 12/11/2012 08:57 PM, Hartmut Knaack wrote: >>>>> Jonathan Cameron schrieb: >>>>>> On 7/16/2012 9:34 AM, Sascha Hauer wrote: >>>>>>> On Sun, Jul 15, 2012 at 11:11:52PM +0200, Lars-Peter Clausen wrote: >>>>>>>> On 07/15/2012 10:40 PM, Hartmut Knaack wrote: >>>>>>>>> This patchset makes the ADT7410 usable. Main reason was the following >>>>>>>>> error when trying to register one of these devices: >>>>>>>>> [ 180.945561] BUG: unable to handle kernel NULL pointer dereference >>>>>>>>> at (null) >>>>>>>>> [ 180.945592] IP: [<f84b1e80>] >>>>>>>>> iio_device_register_eventset+0x380/0x3a0 [industrialio] >>>>>>>>> This happens, since in industrialio-events.c >>>>>>>>> __iio_add_event_config_attrs (which does a INIT_LIST_HEAD) is not >>>>>>>>> called, if the channels attribute of the device is not set. As a >>>>>>>>> result, list_for_each_entry causes those NULL pointer dereference >>>>>>>>> problems. So, before trying to access those list elements, we check >>>>>>>>> for their existence (also in unregister functions). >>>>>>>>> Now the adt7410.c ended in some complex changes - my apologies for this: >>>>>>>>> >>>>>>>>> * check for exact values provided through sysfs, otherwise output >>>>>>>>> a verbose error/usage message for: sample mode, resolution, event mode >>>>>>>>> * adt7410_show_id: I don't see a point in masking out some LSBs, >>>>>>>>> if they get shifted to oblivion, anyway -> no more need for >>>>>>>>> ADT7410_MANUFACTORY_ID_MASK >>>>>>>>> * adt7410_convert_temperature: in 13 bit mode, the driver assumed >>>>>>>>> the data to be stored in bits 0-12, but according to the data sheet, >>>>>>>>> it is stored in bits 3-15. Temperature readings were always around >>>>>>>>> 200(°C), while real temperature was something around 20(°C). Simple >>>>>>>>> fix: mask out bits 0-2 in 13 bit mode and use the 16 bit routines >>>>>>>>> from that point on. >>>>>>>>> * adt7410_set_t_bound: handle float values provided through sysfs >>>>>>>>> properly. Also, simplify treatment of 13 bit values by masking out >>>>>>>>> bits 0-2. >>>>>>>>> * adt7410_probe, adt7410_remove: fix another possible NULL >>>>>>>>> pointer dereference issue, in case no platform data is provided. Sync >>>>>>>>> chip->config with the config register >>>>>>>> Hi, >>>>>>>> >>>>>>>> Sascha Hauer posted a couple of patches a while ago which seem to fix a >>>>>>>> similar set of issues. >>>>>>>> >>>>>>>> See: http://www.spinics.net/lists/linux-iio/msg05947.html and >>>>>>>> http://www.spinics.net/lists/linux-iio/msg05955.html >>>>>>> Indeed, most if not all of the mentioned issues should be fixed already >>>>>>> with these patches. >>>>>>> >>>>>> Just to reiterate what I said to Sascha at the time... This driver does >>>>>> not belong in IIO. It is very much a hardware monitoring part and so >>>>>> wants to move to hwmon. We aren't going to take it out of staging into >>>>>> drivers/iio and I'm rather unwilling to take any 'new' features into the >>>>>> staging version. Someone with hardware who is interesting needs to bite >>>>>> the bullet and convert / rewrite this driver as a hwmon device. >>>>>> >>>>> FYI, I created a basic hwmon driver for ADT7410, which now made it into >>>>> linux 3.7. >>>>> Take care >>>> Ah, great, now we have two drivers which bind to the same device... >>>> >>> Yup, can one of you take a look at the two drivers and see where they >>> differ in functionality. We obviously don't want this messy situation >>> to go on for long! Then again, we don't want to end up with missing >>> functionality in one of them either... >> The IIO driver supports more. It has support for the similar adt7310 and it >> also has support for reporting over- or undertemperature, something which >> can't really be implemented that nicely in the hwmon framework. We did think > hwmon supports configuring over- and undertemperature and supports attributes > for reporting it. > >> about moving this driver to hwmon, but since it does not really support >> threshold events and also is more meant for PC-style hardware monitoring and > There is nothing preventing you from creating such events. See gpio-fan for an > example. That it isn't implemented for most drivers doesn't mean it is not > possible or supported. > >> the adt7410 has primarily other applications I did decide against it. >> Another reason was that we do have the IIO-to-hwmon bridge which would allow >> to instantiate a hwmon userspace interface for the driver if necessary. >> >> Hartmut you knew of the existence of the IIO driver it would have really >> been nice if you had included us on Cc when you submitted the hwmon driver >> that would have allowed us to avoid this messy situation. >> >> One solution could be to just sent a patch to revert the hwmon driver patch, >> but I guess that would be kind of counterproductive. >> > I see two contradicting comments above: "very much a hardware monitoring > part" and "needs to ... rewrite the driver as hwmon device" vs. "the adt7410 > has primarily other applications". Which one is it ? > >> Hartmut any suggestions from your side how to solve this? >> > Sorry, I had assumed the discussion was closed and the decision was made to move > the driver to hwmon. >From what I could see, most issues have been discussed already by now. Well, I also assumed that there was no more discussion going on, since Jonathan stated quite clearly that the iio driver would never make it out of staging. What I still have in mind to add are some configuration options, probably using devicetree, but there are a few other tasks for me to work on, before I can dig into that topic. For the moment I'm glad to have an adt7410 driver outside staging. > Let me know if you want me to revert the hwmon driver; no problem. > > Guenter > _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
