On Mon, 12 Nov 2012 22:59:34 +0200 (EET), ЗЛАТИНА ПАСКАЛЕВА wrote: > Hello, > I have a problem with the correct reading of the temperatures which are read by the sensors of the motherboard. Can you help me to clarify this problem? > I am sending some added files which may give you a clearer idea of the situation. > After I changed in PC Health status in BIOS the scope of CPU Warning Tmperature up to 90.0°C the data showed in temp3 has changed. This suggests that temp3 is your CPU temperature, so you can add a label for it in your configuration file. > Temp2 stays fixed at 25.0°C, but you will see that in the added files. > temp3: +16.0°C (low = +127.0°C, high = +90.0°C) sensor = thermal diode > temp3: +22.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor > temp3: +21.0°C (low = +127.0°C, high = +90.0°C) sensor = thermistor It isn't clear what situations the 3 lines above correspond to. > I made an attempt to change the type of the sensor, as described here: > http://linux.die.net/man/5/sensors.conf > set temp1_type 3 > set temp2_type 3 > set temp3_type 3 > I achieved this unsatisfactory result: > temp1: +11.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode > temp2: +127.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode > temp3: +16.0°C (low = +127.0°C, high = +90.0°C) sensor = thermal diode Changing the sensor types is almost never needed, as the BIOS should have set them up properly. I suggest you remove the configuration statements > Besides I want to ask you does it mean that if my processor does not support Thermal Monitoring Technologies, I will not receive information for it’s moment temperature? Despite the name, the TM and TM2 CPU feature flags have nothing to do with hardware monitoring. They refer to the CPU's ability to monitor and handle its own temperature automatically. Your CPU certainly supports that anyway, it's not exactly a recent feature. > At present I see the temperatures of the cores. > The model of my computer’s mother board is: > GA-P55A-UD3R (rev. 1.0) > http://www.gigabyte.com/products/product-page.aspx?pid=3240#dl > The model of my processor is: > ntel® Core™ i5-750 Processor > (8M Cache, 2.66 GHz) > http://ark.intel.com/products/42915/Intel-Core-i5-750-Processor-8M-Cache-2_66-GHz What really matters to us is the hardware monitoring chip used on the board, and the kernel version you are running. > Please, survey the added files. Sorry but you got it wrong. Sending files as 7 separately tar-gzipped archives is the best way to make sure nobody will look at them. If you really must send many files then put them in a single archive. But the best way is to not compress them and send them as plain text so that readers can see them immediately. Just make sure you only include the relevant information. If you don't know, don't include, and ask if we need more. But more importantly, you did not clearly state what problem you had. So nobody is going to look into your files with no idea what they are looking for. Remember, you are asking for help for free, so it's really up to you to make it as easy as possible for us. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
