Fix the respective checkpatch warnings.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/it87.c | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 3e00a3c..5d31416 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -645,8 +645,8 @@ static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr,
reg &= ~(1 << nr);
reg &= ~(8 << nr);
if (val == 2) { /* backwards compatibility */
- dev_warn(dev, "Sensor type 2 is deprecated, please use 4 "
- "instead\n");
+ dev_warn(dev,
+ "Sensor type 2 is deprecated, please use 4 instead\n");
val = 4;
}
/* 3 = thermal diode; 4 = thermistor; 0 = disabled */
@@ -848,8 +848,8 @@ static int check_trip_points(struct device *dev, int nr)
}
if (err) {
- dev_err(dev, "Inconsistent trip points, not switching to "
- "automatic mode\n");
+ dev_err(dev,
+ "Inconsistent trip points, not switching to automatic mode\n");
dev_err(dev, "Adjust the trip points and try again\n");
}
return err;
@@ -2177,8 +2177,8 @@ static int __devinit it87_check_pwm(struct device *dev)
* PWM interface).
*/
if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
- dev_info(dev, "Reconfiguring PWM to "
- "active high polarity\n");
+ dev_info(dev,
+ "Reconfiguring PWM to active high polarity\n");
it87_write_value(data, IT87_REG_FAN_CTL,
tmp | 0x87);
for (i = 0; i < 3; i++)
@@ -2188,16 +2188,16 @@ static int __devinit it87_check_pwm(struct device *dev)
return 1;
}
- dev_info(dev, "PWM configuration is "
- "too broken to be fixed\n");
+ dev_info(dev,
+ "PWM configuration is too broken to be fixed\n");
}
- dev_info(dev, "Detected broken BIOS "
- "defaults, disabling PWM interface\n");
+ dev_info(dev,
+ "Detected broken BIOS defaults, disabling PWM interface\n");
return 0;
} else if (fix_pwm_polarity) {
- dev_info(dev, "PWM configuration looks "
- "sane, won't touch\n");
+ dev_info(dev,
+ "PWM configuration looks sane, won't touch\n");
}
return 1;
@@ -2509,8 +2509,7 @@ static void __exit sm_it87_exit(void)
}
-MODULE_AUTHOR("Chris Gauthron, "
- "Jean Delvare <khali@xxxxxxxxxxxx>");
+MODULE_AUTHOR("Chris Gauthron, Jean Delvare <khali@xxxxxxxxxxxx>");
MODULE_DESCRIPTION("IT8705F/IT871xF/IT872xF hardware monitoring driver");
module_param(update_vbat, bool, 0);
MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
--
1.7.9.7
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
