# libsensors configuration file for Gigabyte GA-990FXA-UD3 motherboard
# Began with configuration file for Gigabyte GA-MA770-DS3 motherboard
chip "it8720-*"
# lmsensors' values were compared with values from online images
# of Everest or EasyTune 6 displays
# Labels are copied from BIOS setup screens when value shown
# Voltages
label in0 "Vcore"
# 1.312
# BIOS: 1.312
set in0_min 0.85
set in0_max 1.40
label in1 "DDR3 V"
# 1.472
# BIOS: 1.472
# No scaling so no compute
set in1_min 1.5 * 0.95 # 95% of nominal
set in1_max 1.5 * 1.10 # 110% of nominal
label in2 "+3.3V"
# 3.264
# BIOS: 3.280
set in2_min 3.3 * 0.95 # 95% of nominal
set in2_max 3.3 * 1.05 # 105% of nominal
label in3 "Vcc"
# 2.944
# Assume standard Winbond scaling resistors 6.8 - 10 (1.68)
compute in3 @ * ((6.8/10)+1), @ / ((6.8/10)+1)
set in3_min 5 * 0.95 # 95% of nominal
set in3_max 5 * 1.05 # 105% of nominal
label in4 "+12V"
# 3.072
# BIOS: 12.239
compute in4 @ * 4, @ / 4
set in4_min 12 * 0.95 # 95% of nominal
set in4_max 12 * 1.05 # 105% of nominal
label in5 "-12V"
# 3.088
compute in5 @ * -4, @ / -4
set in5_min -12 * 0.95 # 95% of nominal
set in5_max -12 * 1.05 # 105% of nominal
ignore in6
# 4.080
label in7 "VCCH"
# 2.96
compute in7 @ *1.68, @/1.68
set in7_min 5 * 0.95 # 95% of nominal
set in7_max 5 * 1.05 # 105% of nominal
label in8 "Vbat"
# 3.088
# Internal connection
# Temperatures
label temp1 "System"
set temp1_min 20
set temp1_max 60
label temp2 "CPU"
set temp2_min 20
set temp2_max 60
label temp3 "Northbridge"
set temp3_min 20
set temp3_max 90
# Fans
# The labels chosen are the ones printed on the motherboard
label fan1 "CPU_FAN"
set fan1_min 0 # fancontrol may stop fan
label fan2 "SYS_FAN1"
label fan3 "SYS_FAN2"
label fan4 #PWR_FAN"
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
