On Wed, Oct 24, 2012 at 06:40:33PM -0700, camden lindsay wrote:
> >
> > Hi,
> >
> > Please don't top-post.
> >
> > If you set anything but full speed mode, do you see different pwm values ?
> >
> > Also, please provide the output of
> >
> > sudo isadump -y 0x295 0x296 0
> > sudo isadump -y 0x295 0x296 8
> > sudo isadump -y 0x295 0x296 9
> > sudo isadump -y 0x295 0x296 10
> > sudo isadump -y 0x295 0x296 11
> >
> > Thanks,
> > Guenter
> >
> >
> Sorry about the top-post, its a habit from working for years in gmail and
> never really taking part in mailing lists; I really don't know the correct
> mannerisms.
>
> Yes, pwm{1..3} change depending on the fan mode set in bios.
> Out of curiosity, is there a datasheet for the chip floating around? It
> seems the manufacturer makes it on-request-only. I couldn't find it online
> anywhere particularly easily... lots of bad results in a search.
>
>
> Hopefully this isn't too much to parse, but i've provided the
> /sys/bus/hwmon and the isadump output for each of the fan settings in bios
>
Please download and install the driver from https://github.com/groeck/w83627ehf.
This is an experimental version which adds a couple of new features and,
specifically for you chip, a missing fan control mode. If we are lucky that
might solve your problem.
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
