Re: [PATCH v2 1/2] hwmon: (ads7828) driver cleanup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 01, 2012 at 07:16:23PM -0400, Vivien Didelot wrote:
> * Remove unused macros;
> * Point to the documentation;
> * Coding Style fixes (Kernel Doc, spacing);
> * Move driver declaration to avoid adding function prototypes.
> 
> Signed-off-by: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>

Hi Vivien,

> ---
>  drivers/hwmon/ads7828.c | 91 +++++++++++++++++++++++--------------------------
>  1 file changed, 43 insertions(+), 48 deletions(-)
> 
> diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
> index bf3fdf4..fb3010d 100644
> --- a/drivers/hwmon/ads7828.c
> +++ b/drivers/hwmon/ads7828.c
> @@ -6,7 +6,7 @@
>   *
>   * Written by Steve Hardy <shardy@xxxxxxxxxx>
>   *
> - * Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads7828.pdf
> + * For further information, see the Documentation/hwmon/ads7828 file.
>   *
>   * This program is free software; you can redistribute it and/or modify
>   * it under the terms of the GNU General Public License as published by
> @@ -34,14 +34,12 @@
>  #include <linux/mutex.h>
>  
>  /* The ADS7828 registers */
> -#define ADS7828_NCH 8 /* 8 channels of 12-bit A-D supported */
> -#define ADS7828_CMD_SD_SE 0x80 /* Single ended inputs */
> -#define ADS7828_CMD_SD_DIFF 0x00 /* Differential inputs */
> -#define ADS7828_CMD_PD0 0x0 /* Power Down between A-D conversions */
> -#define ADS7828_CMD_PD1 0x04 /* Internal ref OFF && A-D ON */
> -#define ADS7828_CMD_PD2 0x08 /* Internal ref ON && A-D OFF */
> -#define ADS7828_CMD_PD3 0x0C /* Internal ref ON && A-D ON */
> -#define ADS7828_INT_VREF_MV 2500 /* Internal vref is 2.5V, 2500mV */
> +#define ADS7828_NCH		8	/* 8 channels supported */
> +#define ADS7828_CMD_SD_SE	0x80	/* Single ended inputs */
> +#define ADS7828_CMD_SD_DIFF	0x00	/* Differential inputs */
> +#define ADS7828_CMD_PD1		0x04	/* Internal ref OFF && A/D ON */
> +#define ADS7828_CMD_PD3		0x0C	/* Internal ref ON && A/D ON */
> +#define ADS7828_INT_VREF_MV	2500	/* Internal vref is 2.5V, 2500mV */
>  
>  /* Addresses to scan */
>  static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
> @@ -59,25 +57,26 @@ module_param(vref_mv, int, S_IRUGO);
>  static u8 ads7828_cmd_byte; /* cmd byte without channel bits */
>  static unsigned int ads7828_lsb_resol; /* resolution of the ADC sample lsb */
>  
> -/* Each client has this additional data */
> +/**
> + * struct ads7828_data - client specific data
> + * @hwmon_dev:		The hwmon device.
> + * @update_lock:	Mutex protecting updates.
> + * @valid:		Validity flag.
> + * @last_updated:	Last updated time (in jiffies).
> + * @adc_input:		ADS7828_NCH samples.
> + */
This isn't really an externally visible API, so I wonder if it provides value to
document it this way. No strong opinion, just wondering.

>  struct ads7828_data {
>  	struct device *hwmon_dev;
> -	struct mutex update_lock; /* mutex protect updates */
> -	char valid; /* !=0 if following fields are valid */
> -	unsigned long last_updated; /* In jiffies */
> -	u16 adc_input[ADS7828_NCH]; /* ADS7828_NCH 12-bit samples */
> +	struct mutex update_lock;
> +	char valid;
> +	unsigned long last_updated;
> +	u16 adc_input[ADS7828_NCH];
>  };
>  
> -/* Function declaration - necessary due to function dependencies */
> -static int ads7828_detect(struct i2c_client *client,
> -			  struct i2c_board_info *info);
> -static int ads7828_probe(struct i2c_client *client,
> -			 const struct i2c_device_id *id);
> -
>  static inline u8 channel_cmd_byte(int ch)
>  {
>  	/* cmd byte C2,C1,C0 - see datasheet */
> -	u8 cmd = (((ch>>1) | (ch&0x01)<<2)<<4);
> +	u8 cmd = (((ch >> 1) | (ch & 0x01) << 2) << 4);
>  	cmd |= ads7828_cmd_byte;
>  	return cmd;
>  }
> @@ -120,9 +119,8 @@ static ssize_t show_in(struct device *dev, struct device_attribute *da,
>  		ads7828_lsb_resol)/1000);

Can you fix this one as well since you are at it ? There is another one in sensors_ads7828_init().
[ Wonder why checkpatch doesn't complain about it ]

>  }
>  
> -#define in_reg(offset)\
> -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in,\
> -	NULL, offset)
> +#define in_reg(offset) \
> +static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in, NULL, offset)
>  
This causes a checkpatch error - checkpatch doesn't like the multi-line macros.

>  in_reg(0);
>  in_reg(1);

Since it seems to be hardly worth it anyway (yes, I know there are 8 of them),
would be great if you can just get rid of the macro and just use
	static SENSOR_DEVICE_ATTR(in[1-8]_input, ...)
instead.

> @@ -158,25 +156,6 @@ static int ads7828_remove(struct i2c_client *client)
>  	return 0;
>  }
>  
> -static const struct i2c_device_id ads7828_id[] = {
> -	{ "ads7828", 0 },
> -	{ }
> -};
> -MODULE_DEVICE_TABLE(i2c, ads7828_id);
> -
> -/* This is the driver that will be inserted */
> -static struct i2c_driver ads7828_driver = {
> -	.class = I2C_CLASS_HWMON,
> -	.driver = {
> -		.name = "ads7828",
> -	},
> -	.probe = ads7828_probe,
> -	.remove = ads7828_remove,
> -	.id_table = ads7828_id,
> -	.detect = ads7828_detect,
> -	.address_list = normal_i2c,
> -};
> -
>  /* Return 0 if detection is successful, -ENODEV otherwise */
>  static int ads7828_detect(struct i2c_client *client,
>  			  struct i2c_board_info *info)
> @@ -247,13 +226,29 @@ exit:
>  	return err;
>  }
>  
> +static const struct i2c_device_id ads7828_ids[] = {
> +	{ "ads7828", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, ads7828_ids);
> +
> +static struct i2c_driver ads7828_driver = {
> +	.class = I2C_CLASS_HWMON,
> +	.driver = {
> +		.name = "ads7828",
> +	},
> +	.address_list = normal_i2c,
> +	.detect = ads7828_detect,
> +	.probe = ads7828_probe,
> +	.remove = ads7828_remove,
> +	.id_table = ads7828_ids,
> +};
> +
>  static int __init sensors_ads7828_init(void)
>  {
>  	/* Initialize the command byte according to module parameters */
> -	ads7828_cmd_byte = se_input ?
> -		ADS7828_CMD_SD_SE : ADS7828_CMD_SD_DIFF;
> -	ads7828_cmd_byte |= int_vref ?
> -		ADS7828_CMD_PD3 : ADS7828_CMD_PD1;
> +	ads7828_cmd_byte = se_input ? ADS7828_CMD_SD_SE : ADS7828_CMD_SD_DIFF;
> +	ads7828_cmd_byte |= int_vref ? ADS7828_CMD_PD3 : ADS7828_CMD_PD1;
>  
>  	/* Calculate the LSB resolution */
>  	ads7828_lsb_resol = (vref_mv*1000)/4096;
> @@ -267,7 +262,7 @@ static void __exit sensors_ads7828_exit(void)
>  }
>  
>  MODULE_AUTHOR("Steve Hardy <shardy@xxxxxxxxxx>");
> -MODULE_DESCRIPTION("ADS7828 driver");
> +MODULE_DESCRIPTION("Driver for TI ADS7828 A/D converter");
>  MODULE_LICENSE("GPL");
>  
>  module_init(sensors_ads7828_init);
> -- 
> 1.7.11.4
> 
> 

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors


[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux