Hi,
I try to get the measurements from my hardware motherboard. I installed
lm_sensors-3.3.2 and the driver groeck-w83627ehf-d0f3584
As, when I run sensors, I get 0 RPM (min = 0 RPM)
+++++++++++++++++++++++++
~$ sensors
nct6776-isa-0290
Adapter: ISA adapter
Vcore: +0.90 V (min = +0.00 V, max = +1.74 V)
in1: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.31 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.30 V (min = +2.98 V, max = +3.63 V)
in4: +0.02 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +1.72 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.46 V (min = +2.98 V, max = +3.63 V)
Vbat: +0.00 V (min = +2.70 V, max = +3.30 V) ALARM
Fan_01: 0 RPM (min = 0 RPM) ALARM
fan2: 0 RPM (min = 0 RPM) ALARM
fan3: 0 RPM (min = 0 RPM) ALARM
fan4: 0 RPM (min = 500 RPM) ALARM
SYSTIN: +27.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor =
thermistor
CPUTIN: +24.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN: +127.5°C (high = +114.0°C, hyst = +114.0°C) ALARM sensor
= thermistor
cpu0_vid: +0.000 V
intrusion0: ALARM
intrusion1: OK
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 117.23 W (crit = 124.95 W)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +5.6°C (high = +70.0°C)
(crit = +70.0°C, hyst = +67.0°C)
++++++++++++++++++++++++++++
Following the advice
http://lm-sensors.org/browser/lm-sensors/trunk/doc/fan-divisors
I added the divisor in the sensors3.conf:
+++++++++++++++++++++++++
chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"
label in0 "Vcore"
label in2 "AVCC"
label in3 "+3.3V"
label in7 "3VSB"
label in8 "Vbat"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 3.3 * 0.90
set in3_max 3.3 * 1.10
set in7_min 3.3 * 0.90
set in7_max 3.3 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
# For parser test
label fan1 "Fan_01"
ignore fan5
set fan4_min 500
set fan4_div 8 # Parser error
# label temp1 "w83627 TEMPERATURE 01" # OK parser
chip "k10temp-*"
# label temp1 "k10 TEMPERATURE 01" # OK parser
chip "fam15h_power-*"
# label power1 "fam15h POWER 01" # OK parser
++++++++++++++++++++++++
When I run sensors -s with the line
set fan4_div 8
I get the error
++++++++++++++++++++++++
~$ sudo sensors -s
Error: File /etc/sensors3.conf, line 41: Unknown feature name
nct6776-isa-0290: No such subfeature known
++++++++++++++++++++++++
You can see in the sensors3.conf, other lines are OK with the parser.
I tried with different divisors and different fan numbers.
Could you tell me whether it's my mistake or a bug?
Configuration:
ASRock 970 Extreme4 UEFI v2.00
AMD FX-8120
Kernel 3.2.0-30-generic
Ubuntu 12.04 64-bit
lm_sensors-3.3.2 (manual install)
driver groeck-w83627ehf-d0f3584 (manual install)
BTW, could you give me a link where I could get the definition/info
regarding the labels SYSTIN, CPUTIN, etc...
You can see I have AUXTIN: +127.5°C. I don't know what is this value but
looks for me very suspicious.
Many thanks
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
