On Sat, Jun 30, 2012 at 07:52:06AM +0200, Philipp Kraus wrote: > Hello, > > I'm using on a dual xeon system lmsensors and pwmconfig for listing > and controlling the fan speed. > Lmsensors is configurated and checks the temperature of the CPUs, > but the fans rotate every time with > full speed: > > CPU1 Fan: 5555 RPM (min = 2000 RPM) > CPU2 Fan: 5895 RPM (min = 2000 RPM) > > CPU 1 Temp: +50.0 C (high = +75.0 C, hyst = +60.0 C) sensor = Intel PECI > CPU 2 Temp: +53.0 C (high = +75.0 C, hyst = +60.0 C) sensor = Intel PECI > > On booting up the fans have got around 2000 RPMs but some minuts the > system speeds up on idle status > Can you help me please to configure the options correctly, that the > RPMs are only gown up if needed? > Hi Phil, imagine you are an expert in the area. Then imagine someone sends you this e-mail. Do you think you would be able to help based on the information in the e-mail ? Or, in other words, please provide sufficient information for people to actually be able to help. Kernel version, lm-sensors version, complete sensors command output, and all relevant configuration (including pwm configuration) would be a start. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors