On Wed, Jun 27, 2012 at 12:56:00AM +0100, Michael Zintakis wrote: > Hello, > > I hope this is the right place to place my query! > > I am trying to take control and initialise my fan censors and > "sensors-detect" is telling me that the chip on the board is "Fintek > f71869a at 0x290, revision 32". However, when I run sensors (the > service) this driver is not loaded (I can't see any of the fan > sensors either) and dmesg is showing me the following: > > [ 2312.804747] f71882fg: Found f71869a chip at 0x290, revision 32 > [ 2312.804902] ACPI Warning: 0x00000290-0x00000297 SystemIO > conflicts with Region \_TZ_.IP__ 1 (20120111/utaddress-251) > [ 2312.804919] ACPI Warning: 0x00000290-0x00000297 SystemIO > conflicts with Region \_SB_.PCI0.LPCB.SIO1.RNTR 2 > (20120111/utaddress-251) > [ 2312.804934] ACPI: If an ACPI driver is available for this device, > you should use it instead of the native driver > > Could anybody tell me what the above means please? Is there a > conflict between ACPI and the Fintek kernel module sensors (the > service) is trying to load? Is there a separate "ACPI driver" I > should be using instead? If so, how can I activate it so that I > could get to read my fan sensors? > > When I run "sensors" (the program) I see very limited information, > like this: > > acpitz-virtual-0 > Adapter: Virtual device > temp1: +48.0°C (crit = +127.0°C) > temp2: +26.8°C (crit = +127.0°C) > temp3: +26.8°C (crit = +100.0°C) > > coretemp-isa-0000 > Adapter: ISA adapter > Core 0: +51.0°C (crit = +100.0°C) > Core 1: +51.0°C (crit = +100.0°C) > > This is not OK because I don't have any RPMs of any of the fans (I > have 3 fans running) and various voltages I have on this board. I am > using Fedora Core 17 with kernel version 3.3.4 with the latest > version of lm_sensors (3.3.2, I think). > > Many thanks! > Hi Michael, Please see http://hansdegoede.livejournal.com/7932.html; it should explain what is going on. Unfortunately, the generic ACPI driver does not permit much fan control. There are some board specific ACPI drivers, providing better support (eg ASUS and Thinkpad), but for the most part you either get no or very limited fan monitoring/control support. I don't know if generic support for ACPI based hardware monitoring can be improved. Since it might be useful to know, I am copying the ACPI maintainer and the ACPI mailing list. Maybe they can provide some additional information or pointers. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
