On Thu, 2012-05-31 at 16:13 -0400, Jean Delvare wrote: > Hi Sebastian, > > Please keep the list included in the discussion. > > On Thu, 31 May 2012 10:55:17 +0200, Sebastian Lefke wrote: > > sebl@sebl-NB ~ $ lspci > > 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) > > 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) > > 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) > > 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) > > 00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07) > > 00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) > > 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) > > 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) > > 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) > > 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) > > 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) > > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) > > 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) > > 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) > > 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) > > 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) > > 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) > > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) > > 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) > > 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) > > 02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection > > 03:06.0 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) > > 03:06.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12) > > The SMBus controller is missing (should be at 00:1f.3.) This explains > why sensors-detect couldn't see the SMSC EMC2103 chip. > > This is something that was often seen on ICH3/4/5/6 systems, and the > kernel includes code to unhide the SMBus on these old chipsets, but I > think the latest one covered is the ICH7. We'd need to do the same with > the ICH9. > The current version of i2c-i801.c does support ich9. Am I missing something ? Is there a missing variant ? Thanks, Guenter > That being said... > > > sebl@sebl-NB ~ $ sensors > > acpitz-virtual-0 > > Adapter: Virtual device > > temp1: +32.0°C (crit = +105.0°C) > > temp2: +20.0°C (crit = +110.0°C) > > temp3: +31.0°C (crit = +110.0°C) > > temp4: +32.0°C (crit = +90.0°C) > > temp5: +31.0°C (crit = +105.0°C) > > > > coretemp-isa-0000 > > Adapter: ISA adapter > > Core 0: +31.0°C (high = +105.0°C, crit = +105.0°C) > > Core 1: +31.0°C (high = +105.0°C, crit = +105.0°C) > > You have many ACPI thermal zones. Two seem to match the CPU cores as > reported by coretemp. The remaining 3 are very likely to come from the > EMC2103, as I'd be surprised if your laptop had more than one hardware > monitoring chip. So unhiding the SMBus controller would be a bad idea, > as it would open the door to races between ACPI and the i2c-i801 driver. > > We're not going to help you shoot yourself in the foot, sorry. > _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
